Part Number / How to get to the part?

Deepseaskateboard · Post by **Deepseaskateboard** » Wed May 23, 2018 6:22 pm

Hello

Does anyone know the part number, or name of the part outlined in the attached image?

I have realised its importance, as it is above a hall sensor for the roof mechanism.

I noticed a crack in it, but just thought it was superficial.

I know these are sensitive components, so anything which could affect them needs sorting out.

I have tried removing the trim to get to the part, but It is covered in these little black tabs which seem just about impossible to remove, or would take me several hours.
(Maybe this is why BMW repair bills are so high!)

Is there a special tool required to easily remove these?

Any help on the above would be much appreciated.

The part in question:

: 8442E0F4-D4BD-4FDB-AE75-667AE1594079.jpeg (401.11 KiB) Viewed 741 times

The exposed hall sensor, beneath the crack:

: FC247478-7D6D-4D8D-9000-82C4CA02914E.jpeg (400.45 KiB) Viewed 741 times

These annoying little tabs!

: 3C9A62EC-85C6-4D8C-B9A6-75DB0E6D7B93.jpeg (266.28 KiB) Viewed 741 times

clarker63 · Post by **clarker63** » Wed May 23, 2018 8:14 pm

There's a tool to remove those.. or I use a screwdriver to prise then up a little. Not that hard. Look on ebay for trim removal tool and it looks a bit like a fork with two prongs..

Try realoem for the part number.. but it's fairly hard to use I find..

Deepseaskateboard · Post by **Deepseaskateboard** » Wed May 23, 2018 8:36 pm

Thanks! Ordered a trim removal tool.

I also was looking on Real OEM, but its the one part it doesnt seem to list!

flybobbie · Post by **flybobbie** » Thu May 24, 2018 12:34 am

just pull off

jabber · Post by **jabber** » Thu May 24, 2018 6:34 am

Looks like it’s part no 9 in the following diagram

clarker63 · Post by **clarker63** » Thu May 24, 2018 8:39 am

I always find its hard to work out which group its in, and the I haven't found a way to search properly..

Deepseaskateboard · Post by **Deepseaskateboard** » Thu May 24, 2018 9:46 am

jabber wrote: ↑Thu May 24, 2018 6:34 am Looks like it’s part no 9 in the following diagram

Yeah that looks like the one!

Thanks very much.

Will get this ordered.

Deepseaskateboard · Post by **Deepseaskateboard** » Thu May 24, 2018 12:49 pm

They are about £20!!

Well, needs must!

Z4-forum.com

Z4-forum.com