Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

M Bumper retrofit question !

Specific discussion about the E89 2009 Z4 (sDrive35is, sDrive35i, sDrive30i, sDrive23i)
Post Reply
Jimi
Newbie
Newbie
Posts: 30
Joined: Sun Apr 23, 2017 12:31 pm
Location: Normandy

M Bumper retrofit question !

Post by Jimi » Sat Apr 07, 2018 6:30 pm

Hi,
I've just replaced my standard bumper by the M model.

The following lips was included with the kit and seem to be required;
Part 7
Image

But I really don't understand how to mount it because it comes in conflict with the other part 2
Image

Can somebody help me with a photo of an origin M mounting ?

Many Thanks.

warmasice
Member
Member
Posts: 877
Joined: Sun Apr 26, 2015 7:16 pm

M Bumper retrofit question !

Post by warmasice » Mon Apr 23, 2018 1:24 am

I think you already have your answer here http://e89.zpost.com/forums/showthread.php?t=1483809

Mods, please delete if we're not allowed to post links to other forums.
Image

mcbutler
Senior Member
Senior Member
Posts: 2552
Joined: Fri May 26, 2017 3:40 pm
Location: Plymouth

M Bumper retrofit question !

Post by mcbutler » Mon Apr 23, 2018 8:32 am

Jimi wrote: Sat Apr 07, 2018 6:30 pm Hi,
I've just replaced my standard bumper by the M model.

The following lips was included with the kit and seem to be required;
Part 7
Image

But I really don't understand how to mount it because it comes in conflict with the other part 2
Image

Can somebody help me with a photo of an origin M mounting ?

Many Thanks.
See if your local dealer or any local Indy has an car you can look at...
Mark
Plymouth
E89
35i
Carmine Red
Black leather

Jimi
Newbie
Newbie
Posts: 30
Joined: Sun Apr 23, 2017 12:31 pm
Location: Normandy

M Bumper retrofit question !

Post by Jimi » Mon Apr 23, 2018 8:14 pm

warmasice wrote: Mon Apr 23, 2018 1:24 am I think you already have your answer here http://e89.zpost.com/forums/showthread.php?t=1483809

Mods, please delete if we're not allowed to post links to other forums.
Not clear enough, sorry :|
A picture on an original M-Pack Car would help me.

ihadablackdog
Senior Member
Senior Member
Posts: 1130
Joined: Thu Mar 08, 2018 9:56 pm

M Bumper retrofit question !

Post by ihadablackdog » Mon Apr 23, 2018 8:34 pm

In your photo, part A doesn't match part 2 in the expanded diagram...

if you look at where you've put the letter "A" on the photo, compare that to the same location in the diagram, and there should be a vertical bit?

Have you definitely got the correct diagram? Assuming that diagram is for the M Sport version, what is the diagram like for the model your car actually is? Could comparing the two help?

Part B was included in your kit, right? What about part A? Was that in the kit, or was it what you already had?

Looks to me like part B isn't required if your part A is like the one you've got? or does one fit inside the other?
2011 E89 sDrive20i

Jimi
Newbie
Newbie
Posts: 30
Joined: Sun Apr 23, 2017 12:31 pm
Location: Normandy

M Bumper retrofit question !

Post by Jimi » Mon Apr 23, 2018 8:59 pm

Thanks for your kind reply. :wink:

The Part A is the original part which was installed on my car previously. I don't know if this Part is available for both non M and M Bumper but this one fits perfectly with my new M-Bumper installation. --> www.realoem.com/bmw/enUS/showparts?id=L ... Id=51_7256

The Part B was included with the Retrofit M-Bumper installation --> www.realoem.com/bmw/enUS/showparts?id=L ... Id=03_0779

In my opinion, I think if I want to install the Part B, I need to uninstall the Part A. The Part A offers a better protection compared with the small Part B. I do not understand the reason of this difference between Non-M and M Bumper. That's why I would like to compare with an original installation. :?

One last important detail; If I look at the diagram for a 35is model (equivalent with an M-Sport), both the Part A and B are illustrated.
--> http://www.realoem.com/bmw/enUS/showpar ... Id=51_7256

Crazy :-? :dizzy:

Jimi
Newbie
Newbie
Posts: 30
Joined: Sun Apr 23, 2017 12:31 pm
Location: Normandy

M Bumper retrofit question !

Post by Jimi » Mon Apr 30, 2018 7:35 am

Hi,

No body to help me :cry: Just a picture to see how it is installed on an original M model. :wink:

flybobbie
Lifer
Lifer
Posts: 4035
Joined: Sat May 25, 2013 8:27 pm
Location: Stourbridge

M Bumper retrofit question !

Post by flybobbie » Mon Apr 30, 2018 9:01 am

Type in Google underside of e89. there are a few pictures.

Jimi
Newbie
Newbie
Posts: 30
Joined: Sun Apr 23, 2017 12:31 pm
Location: Normandy

M Bumper retrofit question !

Post by Jimi » Mon Apr 30, 2018 1:34 pm

Yes of course but nothing in relation with the subject. :(

ihadablackdog
Senior Member
Senior Member
Posts: 1130
Joined: Thu Mar 08, 2018 9:56 pm

M Bumper retrofit question !

Post by ihadablackdog » Tue May 01, 2018 8:25 pm

Would a picture help if its not dismantled?
2011 E89 sDrive20i

Jimi
Newbie
Newbie
Posts: 30
Joined: Sun Apr 23, 2017 12:31 pm
Location: Normandy

M Bumper retrofit question !

Post by Jimi » Wed May 02, 2018 8:54 pm

With a picture, I could see which type of lip is installed with an original M-Bumper.

flybobbie
Lifer
Lifer
Posts: 4035
Joined: Sat May 25, 2013 8:27 pm
Location: Stourbridge

M Bumper retrofit question !

Post by flybobbie » Wed May 02, 2018 10:50 pm

Disregard.

Jimi
Newbie
Newbie
Posts: 30
Joined: Sun Apr 23, 2017 12:31 pm
Location: Normandy

M Bumper retrofit question !

Post by Jimi » Thu May 03, 2018 6:11 am

flybobbie wrote: Wed May 02, 2018 10:50 pm Disregard.
:-? :-?

flybobbie
Lifer
Lifer
Posts: 4035
Joined: Sat May 25, 2013 8:27 pm
Location: Stourbridge

M Bumper retrofit question !

Post by flybobbie » Thu May 03, 2018 10:52 pm

Jimi wrote: Thu May 03, 2018 6:11 am
flybobbie wrote: Wed May 02, 2018 10:50 pm Disregard.
:-? :-?
Tried to delete comment but it wouldn't let me.
So just put disregard (that post).

Post Reply