Monkey mans power adder

Machine monkey · Post by **Machine monkey** » Wed Sep 05, 2018 11:20 am

Mister T wrote: ↑Wed Sep 05, 2018 10:14 am Might also be worth looking into running a small sump on the turbo oil drain rather than going directly to the scavenge pump.

That’s not a bad idea. And definently an option if I have problems

But at the moment it’s just a case of get it running and see.

paullyjay · Post by **paullyjay** » Tue Sep 11, 2018 5:41 pm

Machine monkey wrote: ↑Tue Sep 04, 2018 9:52 pm Machine monkey

Just saw this on the Hoonigan youtube channel - another rear-mounted turbo!!! HOONIGAN Rear Mounted eBay Turbo

jimmybell · Post by **jimmybell** » Fri Sep 21, 2018 9:12 pm

Did you have any luck getting it mapped?

Machine monkey · Post by **Machine monkey** » Wed Sep 26, 2018 3:39 pm

No not really but its very very close to being done.

LittleZ4 · Post by **LittleZ4** » Sat Nov 24, 2018 5:13 pm

Hey MM, is there any update on the build?

Doddsy · Post by **Doddsy** » Sat Nov 24, 2018 5:30 pm

Awesome

Machine monkey · Post by **Machine monkey** » Tue Dec 04, 2018 12:48 pm

Hi Guys

I am afraid not. I have been really struggling for time. Its very close.
One boost leak to fix. A few small issues and fit a uprated fuel pump and its ready for mapping. I hope to have some time over Christmas to finish it.

Smartbear · Post by **Smartbear** » Tue Dec 04, 2018 1:19 pm

Hope it all comes together with no major issues Matt

Rob

Machine monkey · Post by **Machine monkey** » Thu Dec 06, 2018 9:26 am

Smartbear wrote: ↑Tue Dec 04, 2018 1:19 pm Hope it all comes together with no major issues Matt
Rob

Thanks Rob

I just havent had the time the last 6 months. But i think that will change in the new year

Machine monkey · Post by **Machine monkey** » Sat May 11, 2019 9:19 pm

Hi guys remember me?
Been off cars for a while life’s been busy. New job a 2 year old!
Well spent a few hours on the car over the last few weeks. I have moved the car to my brothers workshop/yard mostly because it’s close to home. And not on my drive way looking sad. I have built a new intercooler out of 2 I had been playing with. Due to the feed and return being on the same side. I have been limited with options. But this is what I have come up with.

: 422934A5-2FF1-47FC-881D-4529299169ED.jpeg (527.45 KiB) Viewed 1144 times

I even managed to fit the oil cooler behind. I just need to notch the crash bar do that fits. And about 10000 other jobs and it’s done

markplant · Post by **markplant** » Sat May 11, 2019 10:00 pm

Worcester_spoon · Post by **Worcester_spoon** » Sun May 12, 2019 5:42 am

Good to hear from you Matt - glad it’s on it’s way to being finished!

Machine monkey · Post by **Machine monkey** » Sun May 12, 2019 7:09 am

Worcester_spoon wrote: ↑Sun May 12, 2019 5:42 am Good to hear from you Matt - glad it’s on it’s way to being finished!

Sorry I haven’t checked in for a while life has been crazy to say the least. But hopefully the car can get a bit of time again. And I can keep you updated. I am off buying a set of wheels later too!!

Darkangelv2 · Post by **Darkangelv2** » Sun May 12, 2019 11:54 am

Machine monkey wrote: ↑Sun May 12, 2019 7:09 am
Worcester_spoon wrote: ↑Sun May 12, 2019 5:42 am Good to hear from you Matt - glad it’s on it’s way to being finished!
Sorry I haven’t checked in for a while life has been crazy to say the least. But hopefully the car can get a bit of time again. And I can keep you updated. I am off buying a set of wheels later too!!

Hi Matt,

Let me know if you’re planning on selling your Style 67s! Fancied trying a set of those for a while.

Machine monkey · Post by **Machine monkey** » Sun May 12, 2019 12:23 pm

67s? Are they the m3 wheels?
You will need to roll your wheel arches for them to fit. Make me an offer? Although I did put my hart and soul into polishing them! Would have to be a cracking offer!! You could get them cheaper else where. But they won’t fit. I machined the mounting face off by a few mm.

Z4-forum.com

Z4-forum.com