Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
3rd brake light
-
- Member
- Posts: 77
- Joined: Thu Aug 20, 2020 8:22 pm
- Location: Neath.South Wales UK
3rd brake light
Hi all
I'm wanting a 3rd brake light do I need to spend £80 on a genuine bmw one or are the £30 ebay ones just as good any info would be great.
I'm wanting a 3rd brake light do I need to spend £80 on a genuine bmw one or are the £30 ebay ones just as good any info would be great.
Bmw z4 3.0i
Africa Twin
Africa Twin
-
- Member
- Posts: 580
- Joined: Wed May 13, 2020 2:27 pm
- Location: Cheshire
3rd brake light
I've heard the cheapo ones don't sit flush like the genuine ones. I'm sure someone on the forum will confirm if this is the case. It's like they say, "Buy cheap, buy twice"
2004 Black Sapphire 3.0L SE. Red leather. Back box delete. Clutch valve delete. Roof motor relocated. 18" M star spoke style 193. Machine Monkey exhaust tips. Gap Tec. ZHP Gear knob. Clear side repeaters. Zun Sport lower grille.
-
- Lifer
- Posts: 5277
- Joined: Wed Feb 19, 2014 3:01 pm
- Location: NW London
3rd brake light
I tried my luck with the Chinese eBay copies. The one I got had no rubber gasket, so it's entirely unfit for purpose.
I did get a full refund after a little arguing though and they didn't want to pay to have it shipped back, so I still have it and will try using some silicone.
I've not tried it for fit but even the OE don't sit quite flush (one aspect of why they break).
I did get a full refund after a little arguing though and they didn't want to pay to have it shipped back, so I still have it and will try using some silicone.
I've not tried it for fit but even the OE don't sit quite flush (one aspect of why they break).
3.0si Sport: F10 Illuminated ZHP, Retrofit Cruise, OE Stubby, Gaptech RCH+, Kenwood BT73DAB + Handsfree, HIDs, LED Sidelights, OE LED Number Plate Lights, Custom LED strip bootlight.
- buzyg
- Legend
- Posts: 26544
- Joined: Fri May 20, 2011 6:11 pm
- Location: Cornwall
3rd brake light
You should be able to find an OEM one for around £50-60. The coppies vary in standard, so I would be reluctant to get one without a recommend and link from someone else. Some have the wrong connector some don't quite fit. Most seem to be fine, but I went for an OEM item.
-
- Member
- Posts: 52
- Joined: Wed Jul 22, 2020 12:02 pm
- Location: Estonia
3rd brake light
I ordered 18€ one from Aliexpress, it did not fit as well as OEM but for that sum it was fine. Had a seal and correct plug.
e85 '04; e21 Baur '80; e12 '80; Alpina D3 '06; Alpina B3 '02
-
- Member
- Posts: 394
- Joined: Wed Jun 15, 2016 7:18 pm
3rd brake light
My cheap eBay one so far has lasted longer than the proper BMW one I had before.
E85 3.0
-
- Member
- Posts: 80
- Joined: Wed Aug 21, 2019 10:22 am
- Location: Isfield, East Sussex
3rd brake light
My clear eBay one is fine. Has a seal on it and so far has kept the water out - Touch wood!
2005 E85 - Merlot - Appropriately named 'Ron Burgandy'...
- Roberltd2
- Member
- Posts: 797
- Joined: Sun Apr 10, 2016 11:28 pm
- Location: Ponterwyd
3rd brake light
Got one off ebay a couple of years ago - Autofashion, China. Still works fine. Doesn't sit quite flush but doesn't allow any water ingress. Thumbs up.
2007 E85 2.5 si Sport in Montego Blue.
1994 Eunos J2Ltd - sold and now undergoing restoration.
1963 Triumph Thunderbird.
1994 Eunos J2Ltd - sold and now undergoing restoration.
1963 Triumph Thunderbird.
- LittleZ4
- Member
- Posts: 708
- Joined: Sun Sep 03, 2017 8:49 am
3rd brake light
My cheaper clear one has lasted really well and sits well. Came with the gaskets. It's a little difficult to say the OEM ones are better as they all seem to fail. Just don't over tighten them! I did the bolts on mine up bit by bit alternating between each bolt so as not to overload any particular side with pressure. Whether that helped or not I don't know, but it didn't and hasn't cracked in about 3 years.
3.0i Maldives blue, Coilovers, Bola B1's, Buckley06 Gear knob, Handbrake & Indicator badges, Backbox delete, CDV delete, cupra r splitter, RAM air filter, Bigger Brakes, M3 ARB, SMF.
- DMike
- Senior Member
- Posts: 2441
- Joined: Tue Sep 11, 2007 7:15 pm
3rd brake light
I ordered a chinese copy which was identical to oem, except the gasket which was crap. Ended up buying an oem one and kept the chinese copy as a spare to use when the oem one cracks once more. These seem to be consumables as they won’t sit flush to the boot lid.
2005 Z4 3.0i Sterling grey
-
- Member
- Posts: 539
- Joined: Wed Jul 11, 2007 10:37 pm
- Location: Peterborough
3rd brake light
there are some new fastenings (springs and washers) available that put less stress on the light and therefore stop it cracking again.
Last edited by gadgetJunky72 on Sun Jul 25, 2021 9:12 pm, edited 1 time in total.
-
- Lifer
- Posts: 5277
- Joined: Wed Feb 19, 2014 3:01 pm
- Location: NW London
3rd brake light
I went to the trouble and expense of doing it properly. Even at the recommended torque for the first change and then subsequently finger tight the issue persists.gadgetJunky72 wrote: ↑Fri Jul 23, 2021 2:53 pm there are some new fastenings (springs and washers) available that don't put less stress on the light and therefore stop it cracking again.
3.0si Sport: F10 Illuminated ZHP, Retrofit Cruise, OE Stubby, Gaptech RCH+, Kenwood BT73DAB + Handsfree, HIDs, LED Sidelights, OE LED Number Plate Lights, Custom LED strip bootlight.