Exhaust fabricators Surrey area

Brouse · Post by **Brouse** » Mon Dec 14, 2020 2:52 pm

Hi folks,

Any recommendation for exhaust fabricators/or fabs capable of taking on exhaust stuff around in/around Surrey?

The finishing on the backbox on my e86 in terms of hanger postions is a little off, I had one quote but the guy just stopped responding.

Cheers!

ibasniper · Post by **ibasniper** » Mon Dec 14, 2020 2:58 pm

Not Surrey, but not too far... Fastlane styling Romford https://fastlanestyling.co.uk/

Theyve done a lot for me and people i know and always been happy.

HU51A_FU · Post by **HU51A_FU** » Mon Dec 14, 2020 3:13 pm

I have used this guy before, amazing quality

https://solid-fabrications.com/ Situated in Bromley.

Cheers

High5 · Post by **High5** » Mon Dec 14, 2020 3:24 pm

Redhill Classics do custom exhaust work, I had them do a centre section and open up my back box to generate some extra noise

Mike6 · Post by **Mike6** » Mon Dec 14, 2020 5:20 pm

I used Mr Exhaust in Redhill to repair the infamous header to exhaust joint and they did an excellent job with a lifetime warranty. I would certainly recommend them.

inkey$ · Post by **inkey$** » Mon Dec 14, 2020 6:46 pm

Alas these guys are in Ashford, Kent but masters of their art...
http://www.zeroexhausts.co.uk/

Otherwise lookup Dean at Pipecraft in Basildon. Good work for a very good price.

inkey$ · Post by **inkey$** » Mon Dec 14, 2020 6:48 pm

HU51A_FU wrote: ↑Mon Dec 14, 2020 3:13 pm I have used this guy before, amazing quality

https://solid-fabrications.com/ Situated in Bromley.

Cheers

These guys are near me. Do you know if they do the standard 3.0 exhaust mod for additional non-drone noise?

Mr Tidy · Post by **Mr Tidy** » Mon Dec 14, 2020 8:51 pm

Not quite in Surrey but when I got my MC last year one of the backboxes had a bracket missing, and as they are Powerflow boxes I took it here:-
https://www.powerflowexhausts.co.uk/Powerflow-Slough

You need to make an appointment so just ring and ask for Nas - he only charged me £30!

Before

: Offside Hanger.JPG (197.08 KiB) Viewed 508 times

After

: New Exhaust Hanger 130320.JPG (143.55 KiB) Viewed 508 times

Hopefully he could sort yours for you.

R60BBA · Post by **R60BBA** » Mon Dec 14, 2020 9:08 pm

http://www.styledynamics.co.uk/

Ask for Sakab and tell him M3 Bob sent you and I’m sure they will look after you.

Brouse · Post by **Brouse** » Mon Dec 14, 2020 10:14 pm

Thanks for the input everyone, really appreciate it!

HU51A_FU · Post by **HU51A_FU** » Tue Dec 15, 2020 12:00 pm

inkey$ wrote: ↑Mon Dec 14, 2020 6:48 pm
HU51A_FU wrote: ↑Mon Dec 14, 2020 3:13 pm I have used this guy before, amazing quality

https://solid-fabrications.com/ Situated in Bromley.

Cheers
These guys are near me. Do you know if they do the standard 3.0 exhaust mod for additional non-drone noise?

You can ask the question mate, however he probably prides himself more on a custom back box for you rather than messing with the old unit, worth a call/email though for sure!

inkey$ · Post by **inkey$** » Tue Dec 15, 2020 12:21 pm

HU51A_FU wrote: ↑Tue Dec 15, 2020 12:00 pm
inkey$ wrote: ↑Mon Dec 14, 2020 6:48 pm
HU51A_FU wrote: ↑Mon Dec 14, 2020 3:13 pm I have used this guy before, amazing quality

https://solid-fabrications.com/ Situated in Bromley.

Cheers
These guys are near me. Do you know if they do the standard 3.0 exhaust mod for additional non-drone noise?
You can ask the question mate, however he probably prides himself more on a custom back box for you rather than messing with the old unit, worth a call/email though for sure!

enuff_zed · Post by **enuff_zed** » Tue Dec 15, 2020 12:29 pm

Brouse wrote: ↑Mon Dec 14, 2020 10:14 pm Thanks for the input everyone, really appreciate it!

Yup, you've got a pretty exhaustive list there.

Brouse · Post by **Brouse** » Tue Dec 15, 2020 6:47 pm

Went with Redhill Classics in the end as they were first in list to want to take it on, booked in for the new year, cheers again!

Brouse · Post by **Brouse** » Tue May 04, 2021 6:43 pm

Finally got round to going Redhill Classics, great guys and a stellar job was only waiting 50 mins!

Z4-forum.com

Z4-forum.com