Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Needing advise on getting lower rear end
-
- Newbie
- Posts: 6
- Joined: Sat Feb 09, 2019 6:52 pm
- Location: Leicestershire
Needing advise on getting lower rear end
I’ve brought some stance+ coil overs and they’ve seemed to of made little to no difference on the back end of my e85 Z4, any tips on how I can get it lower without changing my coil overs? Thanks in advance
- buzyg
- Legend
- Posts: 26534
- Joined: Fri May 20, 2011 6:11 pm
- Location: Cornwall
- road warrior
- Senior Member
- Posts: 2287
- Joined: Wed May 23, 2018 2:12 pm
- Location: Burton On trent
Needing advise on getting lower rear end
couple of slabs should do it
If you ever think I'm off my rocker.. Just put me back in it and walk away... It's the kindest thing
My wife says I never listen - or something like that.
gone but not forgotton -Mean Steve - made a sound like a bear with his nuts in a trap.
My wife says I never listen - or something like that.
gone but not forgotton -Mean Steve - made a sound like a bear with his nuts in a trap.
-
- Member
- Posts: 399
- Joined: Thu Nov 16, 2017 11:08 pm
- Location: Peterborough
Needing advise on getting lower rear end
What is your opinion of the stance+ coilovers? Was looking at them for my e86. I take it they are not adjustable?
Montego blue 2006 BMW Z4 coupe 3.0si with black interior, ZHP, Whippy, 12mm front/16mm rear spacers on BBS 108's wrapped in Michelin PS4's. :driving:Brand new Pierburg water pump fitted at 101k after failure (should have done it at 100k)
-
- Newbie
- Posts: 6
- Joined: Sat Feb 09, 2019 6:52 pm
- Location: Leicestershire
Needing advise on getting lower rear end
Haha
Stance+ coilovers for the price they aren’t too bad! I’ve maxed out the rear but it still looks dead high
Stance+ coilovers for the price they aren’t too bad! I’ve maxed out the rear but it still looks dead high
-
- Newbie
- Posts: 6
- Joined: Sat Feb 09, 2019 6:52 pm
- Location: Leicestershire
Needing advise on getting lower rear end
Can’t really tell from the photo but I want about 10-20mm lower on the rear
- road warrior
- Senior Member
- Posts: 2287
- Joined: Wed May 23, 2018 2:12 pm
- Location: Burton On trent
Needing advise on getting lower rear end
in my not very humble opinion, you would be fecking bonkers to lower it any further
If you ever think I'm off my rocker.. Just put me back in it and walk away... It's the kindest thing
My wife says I never listen - or something like that.
gone but not forgotton -Mean Steve - made a sound like a bear with his nuts in a trap.
My wife says I never listen - or something like that.
gone but not forgotton -Mean Steve - made a sound like a bear with his nuts in a trap.
- ben g
- Lifer
- Posts: 7858
- Joined: Thu Mar 29, 2012 5:20 pm
- Location: Essex
Needing advise on getting lower rear end
That doesn't look correct on the rear. My eibach spring lowered Z4 sits lower than that at the back end.
Red Soft-top Sterling grey 3.0i - Z4M Front, Eibachs, Polybushed, Clear headlights, Triple clear spot rear lights, Shadow Chrome 107's, Sport MFSW, ZHP.
- paulc_bkk
- Member
- Posts: 299
- Joined: Tue Nov 07, 2017 10:48 am
- Location: Thailand
Needing advise on getting lower rear end
When you say stance shocks I guess you mean you can make the length of the shock body shorter or longer? Maybe the shock body is too long?
You could also try it with no spring adjuster to get rid of the final 20mm
I’m running my (e46) coil overs on the rear with no adjuster - just the spring and it sits just like a normal lowering spring
Plenty of clearance underneath, even since fitting the ultraracing underbody brace - I’ve only caught it twice on one very extreme speed bump
You could also try it with no spring adjuster to get rid of the final 20mm
I’m running my (e46) coil overs on the rear with no adjuster - just the spring and it sits just like a normal lowering spring
Plenty of clearance underneath, even since fitting the ultraracing underbody brace - I’ve only caught it twice on one very extreme speed bump
- MACK
- Lifer
- Posts: 3600
- Joined: Mon Jun 15, 2015 11:38 am
- Location: Manchester
Needing advise on getting lower rear end
OP Maybe yours is running the wrong size rubber spring pads at the rear?
Silver 05 3.0i SE
Mods inc - F/L Xenons Clear Ind Rear Lights M Sport Seats & Wheel Eibach/B4 3.64 DIFF (SOLD)
White E89 20i M Sport
Mods inc- B12 kit, M3 Arms, 18" Zito 935's with PS4's, Decat & Remap, Switchable Exhaust Flap (SOLD)
Mods inc - F/L Xenons Clear Ind Rear Lights M Sport Seats & Wheel Eibach/B4 3.64 DIFF (SOLD)
White E89 20i M Sport
Mods inc- B12 kit, M3 Arms, 18" Zito 935's with PS4's, Decat & Remap, Switchable Exhaust Flap (SOLD)
- ben g
- Lifer
- Posts: 7858
- Joined: Thu Mar 29, 2012 5:20 pm
- Location: Essex
Needing advise on getting lower rear end
I reckon a previous owner chucked on some 15mm spring pads, rather than the 5mm pads the Z4 comes with.
Red Soft-top Sterling grey 3.0i - Z4M Front, Eibachs, Polybushed, Clear headlights, Triple clear spot rear lights, Shadow Chrome 107's, Sport MFSW, ZHP.
-
- Newbie
- Posts: 6
- Joined: Sat Feb 09, 2019 6:52 pm
- Location: Leicestershire
Needing advise on getting lower rear end
I’ll try and get a photo for you guys tomorrow and see then see what you think, feel sure the spring pads are 5mm
- Big Andra
- Member
- Posts: 868
- Joined: Tue Jul 17, 2018 1:45 pm
- Location: Scotland
Needing advise on getting lower rear end
I've got the stance ones fitted at the moment with no adjuster on rear and 19" wheels. Going for bc coilovers later in the year as I find the ride on these ones a bit harsh.
- Attachments
-
- 91C2747F-3906-49CE-86C6-F3024EA1C2E6.jpeg (147.71 KiB) Viewed 667 times
-
- 1FDC42EF-5ECD-4EC9-8932-C6AEB897B28A.jpeg (165.67 KiB) Viewed 667 times
-
- 20190210_213704.jpg (147.68 KiB) Viewed 667 times
-
- 20190210_213645.jpg (103.46 KiB) Viewed 667 times
2009 E89 2.5 Alpine white.
-
- Newbie
- Posts: 6
- Joined: Sat Feb 09, 2019 6:52 pm
- Location: Leicestershire
Needing advise on getting lower rear end
Do the springs sit right without the adjuster in?
- paulc_bkk
- Member
- Posts: 299
- Joined: Tue Nov 07, 2017 10:48 am
- Location: Thailand
Needing advise on getting lower rear end
Mine sit perfectly fine with no adjuster