My First Zed Thread (2003 E85 3.0)

2003 - 2009, roadster, coupe, facelift
Post Reply
User avatar
Timmyboybunter
Member
Member
Posts: 501
Joined: Fri Sep 21, 2018 12:35 pm
Location: Bristol/Bath

My First Zed Thread (2003 E85 3.0)

Post by Timmyboybunter » Mon Nov 19, 2018 10:07 am

Thought I'd maintain an ownership thread as my list of mods continues to grow.

My car:

2003 3.0 in sterling grey
107 wheels (elipsoids)
Hybrid black interior with cream leather seats
65k when purchased, August 2018
Options when new: heated electric seats, DSP/Carver stereo, Nav, Bluetooth, cup holders, alarm, auto dimming rear view mirror

Maintenance in my ownership:

Basic service (oil, oil filter, pollen filter, air filter) (thanks @stevengude for the guide) (November 2018 @ 66k)
New coolant, clutch and brake fluid (November 2018 @ 66k)
Leather treatment to seats and door cards
Roof treated with Autoglym cleaner/protector
New discs and pads all round (June 2019)
Auxiliary belts replaced (July 2019)
Door membranes replaced (August 2019)

Mods to date:

Cat back exhaust (present when bought)
New badges all round
Stubby aerial
BMW mats
2 new flip keys (thanks @bmkeys)
Updated navigation software
Updated navigation map DVD
Refitted original airbox (car came with a very/too loud induction kit fitted)
Removed both foam pieces from sound generator
Clear front repeaters
Roof motor relocated to boot (thanks @Number5)
CDV delete
New interior door handle covers
Clear OEM third brake light
New number plates
X8R uprated DISA valve internals
Suplex 06231 rear coil springs
Cream seats fitted with black seat backs and plastics (thanks @maxman)
French fry delete
VW/Audi wheel nut covers
Added sound deadening to doors
Facelift front headlights (thanks @synthedup)
2nd hand replacement undertray (thanks @maxman)
Horizon LED upgrade kit (interior + rear number plate lights)
Refurbished/rebuilt calipers and carriers in silver
Refurbished rear alloys
Bluetooth audio interface fitted (replaced Dension GW100, now removed)

August 2018: (red badges make my eyes bleed)
20180823_114419.jpg
20180823_114419.jpg (273.43 KiB) Viewed 1065 times
August 2019:
20190811_154600.jpg
20190811_154600.jpg (317.8 KiB) Viewed 638 times
INPA
NCSEXPERT
Hard top adjustment
Last edited by Timmyboybunter on Sun Dec 01, 2019 9:54 pm, edited 67 times in total.

User avatar
Timmyboybunter
Member
Member
Posts: 501
Joined: Fri Sep 21, 2018 12:35 pm
Location: Bristol/Bath

My Zed Thread

Post by Timmyboybunter » Mon Nov 19, 2018 10:09 am

Part numbers, with prices if bought new:

Clear indicators: 63137165734 - £22.40

Clear 3rd brake light: 63256930246 - £48.98

Revised springs for 3rd brake light: 63256900698 - £1.47 each + VAT (3 needed)

Washers for 3rd brake light: 07119907030 - £1.25 each + VAT, 3 bought as advised by the dealer, believe that advice was wrong however as none were fitted to my brake light when removed. The washers would fit perfectly over the 3 metal prongs coming out of the brake light, but would be quite tricky to actually fit as they would need to go before the spring. Anyone who has changed one will see what I mean :)

Wiring loom for MFSW control retrofit: 61120394848 - £6.75 + VAT (I read several threads quoting a price of £15 for £20 for this same part)

Scotchlock type connectors for MFSW retrofit: 61138364566 - £1.29 each + VAT. 2 are needed for the retrofit, but the wiring loom part above *does* include 2 in the pack, so you do *not* need to buy them separately (the dealer wasn't sure, so I ordered them anyway)

Door pull cover, off side: 51417042878 - £22.99

Door pull cover, near side: 51417042877 - £22.99

Bonnet badge: 51147044207 - £36.95

Cruise control stalk: 61316940989

Mats (black): 51477030766 - £62.51

Stubby aerial: J6561N3 - £7.60 (Peugeot/Citroen part number)

ZHP gear nob: 25117896886 - $70

Autoglym convertible soft top clean and protect - £20.49

Sanojtape acrylic foam tape (for front number plate mounting): 255mm x 10m - £15.65

Carly gen 2 OBD adapter - £44.90

Carly additional converter adapter for OBD adapter - £10.90

Carly app/yearly subscription - £54.90 :headbang:

CTEK charger direct connector - ££5.67

CTEK charger extension lead - £11.99

X8R DISA valve repair kit - £64.99

Suplex rear coil springs (06231) - £88.82 for 2

VW/Audi 17mm grey wheel nut covers (321601173AZ37) - £13.50 for 20

Silent coat 2mm sound deadening - £39.99 for 30 187mm by 265mm sheets

Horizon LED upgrade kit - £23.91 including P&P (-£6.99 discount code)

Bluetooth Audio Interface - £34.51 including P&P [Amazon]

Door membranes (left 51487016655, right 51487016656) - £81.43 for the pair
Last edited by Timmyboybunter on Tue Aug 20, 2019 1:30 pm, edited 10 times in total.

User avatar
kis
Lifer
Lifer
Posts: 3086
Joined: Wed Jul 20, 2016 2:33 pm
Location: Surrey / West Sussex Boarder

My Z Thread

Post by kis » Mon Nov 19, 2018 4:09 pm

Very nice... have you done most of the mods yourself? You're on the slippery slope now... it's hard to know when to stop! :lol:
Rare '15 Plate E85 Z4 3.0i SMG

BMW Family History (past and present):
1 Series - E87
3 Series - E46 320ci, E46 M3, E90 (x2)
4 Series - F36, F82 M4
5 Series - E34 (x2), E39
X5 - E53, E70
X6 - E71
7 Series - E32

User avatar
Timmyboybunter
Member
Member
Posts: 501
Joined: Fri Sep 21, 2018 12:35 pm
Location: Bristol/Bath

My Z Thread

Post by Timmyboybunter » Mon Nov 19, 2018 5:50 pm

Thanks :D
Yes it's always dangerous getting a new car, mod wise. This is my first BMW after a lifetime of tweaking VAG cars so it's all good fun!

I try to do as much as I can myself, partly to save costs but partly because I quite enjoy the challenge (I'm not particularly handy with a spanner, but can generally follow instructions). I did the basic service myself, got my local garage to do the coolant/brake/clutch fluid and they were happy to do the CDV delete while they had it on the ramps. I did everything else above apart from the roof relocate (having watched Alan do this yesterday, that was a fine decision on my part :)). To be fair most of them are very easy, the MFSW was probably the most tricky but it all kicked into life.

User avatar
tomrdy
Member
Member
Posts: 418
Joined: Tue Jun 26, 2018 9:16 am
Location: Sydney, Australia

My Z Thread

Post by tomrdy » Tue Nov 20, 2018 11:36 pm

Looks exactly like my car in that pic from when I first picked mine up!

Solid list you got going :thumbsup:

What was the induction kit that was too loud? Just random pieces or a kit? I ask because I was playing around with building a louder airbox but found with my sound gen (1 piece of foam removed), I can't even hear anything from up front over it.

User avatar
Timmyboybunter
Member
Member
Posts: 501
Joined: Fri Sep 21, 2018 12:35 pm
Location: Bristol/Bath

My Z Thread

Post by Timmyboybunter » Thu Nov 22, 2018 9:36 am

Yes they do look similar :D I'm a big fan of the wheels, I thought they were a bit busy looking when I first got it but they quickly grew on me.

The induction kit was just random - it was literally just a cone filter added where the airbox should sit, with a home-made bit of strong steel wire supporting it off the engine block. I usually like a good bit of induction noise and have made many mods on previous cars to make it louder, but this thing was ridiculous, just sounded like there was an angry snake sitting in the bonnet but not in a good/sporty way.

Almost seems a shame to interrupt any of the noises coming from the engine bay or exhaust on this car, it really does sound good especially with the exhaust fitted. Zero drone, but a lovely burble complete with gentle pops and bangs when coasting :thumbsup:

User avatar
tomrdy
Member
Member
Posts: 418
Joined: Tue Jun 26, 2018 9:16 am
Location: Sydney, Australia

My Z Thread

Post by tomrdy » Thu Nov 22, 2018 10:02 am

Ah yeh when I put the pod on there was a lot of loud whistling/hissing/whining - I definitely turned heads but as you say, not in a good/sporty way :P

Do you know what exhaust is fitted on yours?

User avatar
Timmyboybunter
Member
Member
Posts: 501
Joined: Fri Sep 21, 2018 12:35 pm
Location: Bristol/Bath

My Z Thread

Post by Timmyboybunter » Sat Nov 24, 2018 5:26 pm

I don't - there was a freebie sticker in the car when I got it with the exhaust manufacturer name, I chucked it in the bin and can't remember what it said - possibly 'Supersprint'. I'll see if there's anything obvious on the exhaust next time I'm under the car.

User avatar
Timmyboybunter
Member
Member
Posts: 501
Joined: Fri Sep 21, 2018 12:35 pm
Location: Bristol/Bath

My Z Thread

Post by Timmyboybunter » Sat Nov 24, 2018 5:29 pm

New wheel:
Attachments
Wheel.jpg
Wheel.jpg (210.38 KiB) Viewed 2052 times

User avatar
Timmyboybunter
Member
Member
Posts: 501
Joined: Fri Sep 21, 2018 12:35 pm
Location: Bristol/Bath

My Z Thread

Post by Timmyboybunter » Sat Nov 24, 2018 5:34 pm

Clear 3rd brakelight and side repeaters:
Attachments
Clear.jpg
Clear.jpg (220.78 KiB) Viewed 2049 times

User avatar
Timmyboybunter
Member
Member
Posts: 501
Joined: Fri Sep 21, 2018 12:35 pm
Location: Bristol/Bath

My Z Thread

Post by Timmyboybunter » Sat Nov 24, 2018 5:39 pm

Roof motor relocate:
Attachments
Roof3.jpg
Roof3.jpg (172.9 KiB) Viewed 2047 times
Roof2.jpg
Roof2.jpg (331.54 KiB) Viewed 2047 times
Roof1.jpg
Roof1.jpg (233.22 KiB) Viewed 2047 times
Roof4.jpg
Roof4.jpg (170.78 KiB) Viewed 2047 times

User avatar
Timmyboybunter
Member
Member
Posts: 501
Joined: Fri Sep 21, 2018 12:35 pm
Location: Bristol/Bath

My Z Thread

Post by Timmyboybunter » Sat Dec 01, 2018 5:38 pm

E83 X3 head unit fitted today, so this is the basic MP3 compatibility I was looking for. I did buy a cheap and cheerful 2nd hand iPod off Ebay which does work with the Dension unit fitted, but the Dension cable is slightly dodgy and needed to be held in a certain way to keep constant charging and audio.

Left the Dension unit in place, so any future owners can use it if a new cable is bought.

The X3 unit is just plug and play - my OCD won't be able to live with a black stereo and grey vents so I'll grab a facelift black vent unit on Ebay when one comes up at a reasonable price. The black actually looks nice as it matches the side vents.
Attachments
X3_2.jpg
X3_2.jpg (178.13 KiB) Viewed 1973 times
X3_1.jpg
X3_1.jpg (168.94 KiB) Viewed 1973 times

JonLeeper
Member
Member
Posts: 202
Joined: Wed May 30, 2018 10:35 am
Location: Rochester, Kent

My Z Thread

Post by JonLeeper » Sat Dec 01, 2018 6:58 pm

Just out of interest what does the x3 head unit provide that the normal one doesn't? It looks like a great fit, and almost stock. I'm looking to try and fit a head unit that will give me a bluetooth connection for my phone. Unfortunately the aftermarket head unit installs I've seen aren't great.
My daily driver, and occasional track toy,
56 plate e86 3.0si sport.
Black
6 pot front brakes
B12 kit
Front and rear strut braces
Polly bushed
Short shift kit

90 miles and climbing, slowly.
:driving:

User avatar
Timmyboybunter
Member
Member
Posts: 501
Joined: Fri Sep 21, 2018 12:35 pm
Location: Bristol/Bath

My Z Thread

Post by Timmyboybunter » Sat Dec 01, 2018 7:40 pm

Short answer - nothing :)
If you have a black head unit already, the X3 unit is basically identical. For pre face lift cars with a grey head unit like mine, they can't play MP3's, just standard audio discs. I only bought the X3 unit as it was a fair bit cheaper than any facelift e85/e86 units on Ebay at the time.

Grom seems to be a popular option for bluetooth, or later Dension models.I believe iphones will happily work with stock bluetooth modules - mine is Android, so connects fine and makes calls, but sends no audio :(

I also learned about 'Avin' Android units today - there is one available for e83 X3s which I wonder may fit to sat nav equipped Z4's, one to research. I have an aftermarket Android unit fitted to my Skoda and it's excellent.
Last edited by Timmyboybunter on Sat Dec 01, 2018 7:49 pm, edited 1 time in total.

User avatar
Timmyboybunter
Member
Member
Posts: 501
Joined: Fri Sep 21, 2018 12:35 pm
Location: Bristol/Bath

My Z Thread

Post by Timmyboybunter » Sat Dec 01, 2018 7:48 pm

This chap posted on Facebook earlier - I think that may be an Avin X3 screen he has fitted.
Attachments
FB_IMG_1543689996451.jpg
FB_IMG_1543689996451.jpg (196.77 KiB) Viewed 1932 times

Post Reply