Hi all
Taken a couple of pics of front and rear arches,been told 20mm rear 12-15 front,do you think front will need that much looking at photos,rear i think will be no problem
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Wheel spacers
- CHIMV8
- Member
- Posts: 394
- Joined: Sun Jun 10, 2018 5:47 pm
- philbo909
- Senior Member
- Posts: 1072
- Joined: Fri Apr 28, 2017 4:46 pm
- Location: SN8
Wheel spacers
What offset are your wheels? 20 rear and 12 front works well on oem fitment wheels, but yours are aftermarket
Sapphire black z4 coupe 135,000miles young
- CHIMV8
- Member
- Posts: 394
- Joined: Sun Jun 10, 2018 5:47 pm
Wheel spacers
I don't remember seeing any ET on the inside af any wheel
I'll have to take one side off again and double check
I'll have to take one side off again and double check
Sterling Grey 3.0
- Steve84N
- Senior Member
- Posts: 1828
- Joined: Tue Jul 21, 2015 1:00 pm
Wheel spacers
If you're lowered, which I believe you are, then I'd stick with 10mm front as for me that was literally the limit. It rubbed a tiny amount and after the liner wore a fraction of a mm it didn't rub anymore. Personally, I wouldn't add a load more on the back compared to the front, as even though there's room if you make the rear axle relatively wider it'll introduce more understeer.
C63 AMG Estate 6208cc