Eurostyle Tips GROUPBUY for the Z4M??????

NVUZ4M · Post by **NVUZ4M** » Sat Aug 11, 2018 7:30 pm

Hi guys

Would any of you be interested in a group buy on these Eurostyle Tips for the Z4M? I've spoke to the guy on ebay and he will do a set for £130 delivered if we can get 5 or more people?

Heres his ebay link with the Tips fitted on a Z4M

https://www.ebay.co.uk/itm/263853829338 ... 1555.l2649

Scooba_Steve · Post by **Scooba_Steve** » Sat Aug 11, 2018 8:31 pm

These seem better value... viewtopic.php?f=2&t=106653

NVUZ4M · Post by **NVUZ4M** » Sun Aug 12, 2018 10:27 am

Scooba_Steve · Post by **Scooba_Steve** » Sun Aug 12, 2018 10:38 am

NVUZ4M wrote: ↑Sun Aug 12, 2018 10:27 amugly

You wouldn't happen to be the seller, would you? First post and all...

These are similar for a fraction of the price: https://www.ebay.co.uk/itm/Universal-Ro ... Sw4vJaybmn

NVUZ4M · Post by **NVUZ4M** » Sun Aug 12, 2018 10:47 am

Scooba_Steve wrote: ↑Sun Aug 12, 2018 10:38 am You wouldn't happen to be the seller, would you? First post and all...

These are similar for a fraction of the price: https://www.ebay.co.uk/itm/Universal-Ro ... Sw4vJaybmn

No, i'm actually cuddy off the M3cutters site, i'm running a group buy on there at the moment. popped over here to see if we could get a few more people in on it.

And those tips you posted are cheap Chinese crap. but each to their own I suppose

mmm-five · Post by **mmm-five** » Sun Aug 12, 2018 11:04 am

They look like the tips on my Rogue Diablo exhausts.

Yorkie Z · Post by **Yorkie Z** » Sun Aug 12, 2018 11:10 am

They do like good. 10mm bigger on the O/D so will probably suit the gap better. Do you know what grade stainless they are using, ideally it needs to be 316.

I'm interested if it is

Yorkie Z · Post by **Yorkie Z** » Sun Aug 12, 2018 11:11 am

mmm-five wrote: ↑Sun Aug 12, 2018 11:04 am They look like the tips on my Rogue Diablo exhausts.

Nice

NVUZ4M · Post by **NVUZ4M** » Sun Aug 12, 2018 12:41 pm

Yorkie Z wrote: ↑Sun Aug 12, 2018 11:10 am They do like good. 10mm bigger on the O/D so will probably suit the gap better. Do you know what grade stainless they are using, ideally it needs to be 316.

I think its 304 mate

mmm-five · Post by **mmm-five** » Sun Aug 12, 2018 5:56 pm

NVUZ4M wrote: ↑Sun Aug 12, 2018 12:41 pm I think its 304 mate

My Diablos are T304 too - and have been on for over 60,000 miles.

Post by **srhutch** » Sun Aug 12, 2018 6:30 pm

I was looking on eBay at these earlier in the week.

I could be up for a set.

Would love to see some more pics of how the internals look. Is the internal pipe hard to see?

Yorkie Z · Post by **Yorkie Z** » Mon Aug 13, 2018 8:30 pm

srhutch wrote: ↑Sun Aug 12, 2018 6:30 pm I was looking on eBay at these earlier in the week.

I could be up for a set.

Would love to see some more pics of how the internals look. Is the internal pipe hard to see?

I've ordered a set, I'll get some pictures up when I get them fitted.

RickRob · Post by **RickRob** » Mon Aug 13, 2018 9:37 pm

How easy/otherwise is it for a total techinical muppet to remove pop rivets and secure the new tips with new pop rivets?

(Not me of course - asking for a friend!

)

NVUZ4M · Post by **NVUZ4M** » Tue Aug 14, 2018 10:34 pm

RickRob wrote: ↑Mon Aug 13, 2018 9:37 pm How easy/otherwise is it for a total techinical muppet to remove pop rivets and secure the new tips with new pop rivets?

It’s not a big job at all, plenty of guides on m3 cutters on fitting

paullyjay · Post by **paullyjay** » Fri Aug 17, 2018 5:05 pm

because an M set is 4 tips, if you have a non M, you could go in with another forum member and get 2 sets of 2 for £65 each!

Z4-forum.com

Z4-forum.com