Hi all,
After relocating the roof motor two years ago, I'm finally getting round to finishing the job by completing the housing process.
However, when I originally got the motor out, I discarded the foam wrap from the motor because of it's disgusting state.
Can I replace this with any type of noise-reducing foam wrap? Or does it need to be specifically fireproof?
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Roof Motor Foam Wraparound
-
- Member
- Posts: 87
- Joined: Tue Apr 16, 2013 11:06 pm
Roof Motor Foam Wraparound
[ Insert Zed spec here ]
- tug
- Senior Member
- Posts: 2306
- Joined: Sun Apr 27, 2014 10:10 am
- Location: Loughborough
Roof Motor Foam Wraparound
Hi, any noise deadening material will do because the motor only works for seconds there is no chance of fire hazard. Wrap the motor with the material of your choice and pull the boot carpet in front of it, sealing it in the alcove then put a carpet covered board in front of the lot.
Cheers, tug
Cheers, tug
E85 N46 2.0i SE BLACK SAPPHIRE