Z4M activated charcoal filter fits a 3.0si ? with M bumper

Markos_Z4 · Post by **Markos_Z4** » Mon Jun 11, 2018 8:10 pm

you think this wil fit on my Z4 coupe 3.0si with a M bumper?

http://www.realoem.com/bmw/en/showparts ... Id=51_4961

my z4 with M rear bumper

Post by **srhutch** » Mon Jun 11, 2018 8:16 pm

Battery tray is going to be in the way I think you’ll find.

Scooba_Steve · Post by **Scooba_Steve** » Mon Jun 11, 2018 8:49 pm

What does it even do?

Markos_Z4 · Post by **Markos_Z4** » Mon Jun 11, 2018 8:53 pm

what can i do. . . build my own i think

maybe leaving it like that

kis · Post by **kis** » Tue Jun 12, 2018 8:44 am

Markos_Z4 wrote: ↑Mon Jun 11, 2018 8:53 pm what can i do. . . build my own i think maybe leaving it like that

Whats your end game? Is it just tying up the new M bumper to the car?

Markos_Z4 · Post by **Markos_Z4** » Tue Jun 12, 2018 10:04 am

yes i fitted the new M bumper !
i think i have to remove the battery

kis · Post by **kis** » Tue Jun 12, 2018 12:47 pm

I used a cut off from a "standard" bumper on mine. So it ties into the under body of the car like your old bumper did, to those 4 holes highlighted connect to the cut off section.

JINGLE · Post by **JINGLE** » Tue Jun 12, 2018 10:10 pm

I’ve always wondered this, I don’t like how my front bumper is all connected with my //M undertray and splitter... yet my rear bumper isn’t connected at all!!

What do all other people do whose don’t the conversion, just leave it?

Markos_Z4 · Post by **Markos_Z4** » Wed Jun 20, 2018 7:44 pm

JINGLE wrote: ↑Tue Jun 12, 2018 10:10 pm I’ve always wondered this, I don’t like how my front bumper is all connected with my //M undertray and splitter... yet my rear bumper isn’t connected at all!!

What do all other people do whose don’t the conversion, just leave it?

when my custom exhaust is finished i think go build something my self

JINGLE · Post by **JINGLE** » Wed Jun 27, 2018 10:44 pm

Markos_Z4 wrote: ↑Wed Jun 20, 2018 7:44 pm
JINGLE wrote: ↑Tue Jun 12, 2018 10:10 pm I’ve always wondered this, I don’t like how my front bumper is all connected with my //M undertray and splitter... yet my rear bumper isn’t connected at all!!

What do all other people do whose don’t the conversion, just leave it?
when my custom exhaust is finished i think go build something my self

Keep me updated with progress please mate

kis · Post by **kis** » Tue Jul 03, 2018 12:12 pm

This is what I did, I appreciate it's not very clear. Theres not much room underneath and phone was literally on the floor!
So like I said, I used a section of an old bumper cut it off and attached it to the 4 holes, then tied it in as normal to that bolt back by the battery box.

: IMG_4014.jpg (54.06 KiB) Viewed 806 times

Markos_Z4 · Post by **Markos_Z4** » Fri Jul 06, 2018 5:53 pm

thx ! looks great ! abs sheet inside the bumper

kis wrote: ↑Tue Jul 03, 2018 12:12 pm This is what I did, I appreciate it's not very clear. Theres not much room underneath and phone was literally on the floor!
So like I said, I used a section of an old bumper cut it off and attached it to the 4 holes, then tied it in as normal to that bolt back by the battery box.
IMG_4014.jpg

Beedub · Post by **Beedub** » Mon Jul 09, 2018 12:04 pm

Scooba_Steve wrote: ↑Mon Jun 11, 2018 8:49 pm What does it even do?

helps clean up air under the car and also appears to be some sort of exhaust outlet for air going thru the diff cooling sections

Scooba_Steve · Post by **Scooba_Steve** » Mon Jul 09, 2018 12:45 pm

But no filter? seems an odd part title!

Post by **srhutch** » Mon Jul 09, 2018 1:14 pm

Scooba_Steve wrote: ↑Mon Jul 09, 2018 12:45 pm But no filter? seems an odd part title!

Just the diffuser, the charcoal filter is a separate unit that sits above it.

As you say the title is incorrect.

Z4-forum.com

Z4-forum.com