Can you identify this?

Tomsdad · Post by **Tomsdad** » Thu May 24, 2018 1:48 pm

having washed the car I was drying bits under the bonnet and this came off the drivers side under the bonnet.
Can't find an identical one on the passenger side.

: image.jpeg (338.74 KiB) Viewed 512 times

It looks like it clips onto the bonnet lip and cushions the bonnet closure. But why just the one?

Never attached a photo her before so not sure if you can see it.

Thanks

adam1985 · Post by **adam1985** » Thu May 24, 2018 1:53 pm

Can see the pic fine.....unfortunately no idea what it is

sorry

Z4C_er · Post by **Z4C_er** » Thu May 24, 2018 1:55 pm

Yes, it slides on to the weld flange and bumps on the 'catwalk' about half way down the bonnet edge:

: bump.JPG (41.19 KiB) Viewed 503 times

Tomsdad · Post by **Tomsdad** » Thu May 24, 2018 3:39 pm

Thanks

Ducklakeview · Post by **Ducklakeview** » Thu May 24, 2018 4:00 pm

I think you'll find it actually fits onto the edge of the bonnet like this..

: 20180524_155824.jpg (81.17 KiB) Viewed 457 times

there should be one either side.

Mike

Z4-forum.com

Z4-forum.com