Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Bubbling on badges

Claying, polishing, waxing... share your secrets in here.
Post Reply
Brown
Newbie
Newbie
Posts: 34
Joined: Wed Oct 17, 2018 5:41 pm

Bubbling on badges

Post by Brown » Tue Dec 04, 2018 7:02 pm

I went to look at a 2007 Z4MC today, the BMW boot opening badge and the BMW side indicator badges were bubbling badly, as was the badge on the bonnet - is this common - can they be replaced.

Also, the colours were fading on the M badge on the back - looked like it had been over polished - is that common.

Should I expect that from any of these cars from 2006/07 or was this bad care in previous years.

Thanks.
///M Coupé | Interlagos | GruppeM In | BCS Powervalve out | Dropped on Eibach’s | You can take the boy out of Essex...

User avatar
Trav
Member
Member
Posts: 330
Joined: Sat Nov 17, 2018 5:16 pm
Location: Perthshire

Bubbling on badges

Post by Trav » Tue Dec 04, 2018 7:17 pm

Badges are easily replaced on all cars. I have ordered up new wheel centre caps etc. for when I get my wheels done in spring. I did notice some fading of the badge colours on mine also. But its small beer. I think they are the least of your worry when buying an M car. Get an inspection done if you are in any doubt about the cars condition.
Z4MR A.W.

Angelus666
Senior Member
Senior Member
Posts: 2257
Joined: Sun Aug 31, 2014 4:33 pm
Location: Essex
Contact:

Bubbling on badges

Post by Angelus666 » Tue Dec 04, 2018 8:00 pm

Yep, totally common on a 12-year-old car. Replacement stickers for the stripes are £6 and the bonnet badges are about £40 a pop for genuine ones. If the rest of the car checks out then this is no reason not to buy.

User avatar
Tinker15
Member
Member
Posts: 690
Joined: Thu Oct 11, 2018 8:42 pm
Location: Holmfirth, West Yorkshire

Bubbling on badges

Post by Tinker15 » Tue Dec 04, 2018 9:22 pm

There was bubbling on the boot badge of my 2010 e89 when I got it. A new OEM badge cost £45. It is stuck on and needs to be prised off. You need to clean the crud from the mounting plate and then stick on the new one. It comes with adhesive on the badge.

Before and after.
Attachments
After
After
916DFE83-9072-48A6-915C-4B8C33E8290E.jpeg (231.77 KiB) Viewed 883 times
Before
Before
274E315D-A943-4EF6-BD61-ECE248F6F6DA.jpeg (271.39 KiB) Viewed 883 times
Image
E89 sDrive 30i
Jaguar XF 3.0D
TVR Chimaera 450 (now sold)

Brown
Newbie
Newbie
Posts: 34
Joined: Wed Oct 17, 2018 5:41 pm

Bubbling on badges

Post by Brown » Sun Dec 09, 2018 12:30 pm

Cool. Thanks for the responses.
///M Coupé | Interlagos | GruppeM In | BCS Powervalve out | Dropped on Eibach’s | You can take the boy out of Essex...

Post Reply