Z4-forum.com

Finally fitted my cruise control yesterday and it works! Many thanks to Srhutch for the loom and consise instructions. As a bonus the car seems to running smoother after a few hours with the battery disconnected.
Rob.

srhutch wrote: ↑Sat Nov 18, 2017 7:47 pmI’ve only done one. From memory i disconnected the plugs from the small black box where pin 39 is. Doing that enabled me to straighten out the rubber hose enough to push a bit of garden wire through with which I could then pull the blue wire through.

Quick question on this, is pin 39 on the grey connector easy to spot ? Are the pin numbers written on the connector ? (I have a facelift N52 model)

Yes, the plastic plugs are numbered.

For clarification I made a slight alternation to the docs recently as it was pointed out the grey plug is in two sections, one of which is grey and one black which led to a little confusion.

You then need to connect it into Pin 39 of the grey plug (two section grey and black in the grey plug. It goes in the black section)

Hey Srhutch,

Are you still carrying out this service please?

Thanks

Dan

Hi - can you tell me please if this will work for a 2009 3.0i E89 with an N52 engine please?

Hi Steve, if they’re still available I’d like to buy a loom please. Z4 E85 3.0i 2005 Roadster .thanks Anthony

Hi Steve, if they’re still available I’d like to buy a loom please. Z4 E85 3.0i 2005 Roadster. Thanks Anthony

StephenM wrote: ↑Sun Apr 29, 2018 10:27 pm Hi - can you tell me please if this will work for a 2009 3.0i E89 with an N52 engine please?

Sorry E85/6 only.

I'm looking for one of these looms too please if still available!

Courageous wrote: ↑Wed May 30, 2018 10:31 am I'm looking for one of these looms too please if still available!

They are, I will pm you.

A little late, though many thanks for the supply & fit Steve.

Has been working faultlessly since, making 30mph zones a breeze, not a speedo distracting liability.

Heya, i would like to retro cruise control, no idea how to do it. Hutch can you help?

Looney wrote: ↑Wed Jul 11, 2018 1:25 pm Heya, i would like to retro cruise control, no idea how to do it. Hutch can you help?

I'll drop you a PM.

HI, I am too new to PM you, can you email me at xxxx if you still do the wiring looms for a E85 2.5si and if so send me payment details and let me know how quickly you coudl send it. I have the stalk and someone to install.

Thanks

Kevin

Hi, I am interested in this too. I've read all the posts in this thread, but I'm still quite unsure about the installation of the cc. Am I correct in thinking that srhutch provides all the wiring, but I'd need to have my own stalk and the cowl with a space for it (or a cut out in the existing one)?

Would a cc stalk from a different bmw series fit the E85?

I've got a 2.5si N52 and perhaps would be interested in this kit, once I can understand a little more about the installation