Custom Cruise Control Loom

Discount codes and service & product offerings from forum members
Post Reply
Bertz4
Newbie
Newbie
Posts: 22
Joined: Mon Jul 24, 2017 12:02 pm
Location: Stourbridge

Custom Cruise Control Loom

Post by Bertz4 » Sat Jan 27, 2018 10:06 am

Finally fitted my cruise control yesterday and it works! Many thanks to Srhutch for the loom and consise instructions. As a bonus the car seems to running smoother after a few hours with the battery disconnected.
Rob.
Current: 2005 Z4 3.0i Sterling grey, red leather, 108's.
Previous: 1991 TVR S3 2.9 V6

User avatar
saseinlinie
Newbie
Newbie
Posts: 34
Joined: Tue Aug 29, 2017 10:26 am

Custom Cruise Control Loom

Post by saseinlinie » Sat Feb 03, 2018 11:56 am

srhutch wrote:
Sat Nov 18, 2017 7:47 pm
I’ve only done one. From memory i disconnected the plugs from the small black box where pin 39 is. Doing that enabled me to straighten out the rubber hose enough to push a bit of garden wire through with which I could then pull the blue wire through.
Quick question on this, is pin 39 on the grey connector easy to spot ? Are the pin numbers written on the connector ? (I have a facelift N52 model)

User avatar
srhutch
Moderator
Moderator
Posts: 24449
Joined: Tue Jun 19, 2007 1:22 pm
Location: East Sussex, UK
Contact:

Custom Cruise Control Loom

Post by srhutch » Sat Feb 03, 2018 12:36 pm

Yes, the plastic plugs are numbered.

For clarification I made a slight alternation to the docs recently as it was pointed out the grey plug is in two sections, one of which is grey and one black which led to a little confusion.

You then need to connect it into Pin 39 of the grey plug (two section grey and black in the grey plug. It goes in the black section)
Image

Gibon101
Newbie
Newbie
Posts: 8
Joined: Sun Mar 18, 2018 7:33 pm

Custom Cruise Control Loom

Post by Gibon101 » Thu Mar 29, 2018 8:24 am

Hey Srhutch,

Are you still carrying out this service please?

Thanks

Dan
2004 E85 2.5 manual

StephenM
Newbie
Newbie
Posts: 12
Joined: Sun Mar 11, 2018 6:53 pm

Custom Cruise Control Loom

Post by StephenM » Sun Apr 29, 2018 10:27 pm

Hi - can you tell me please if this will work for a 2009 3.0i E89 with an N52 engine please?
E89 - 2009 Deep Sea Blue - SDrive 3.0I - pure white design interior

Ant25
Newbie
Newbie
Posts: 2
Joined: Mon Apr 30, 2018 10:02 pm

Custom Cruise Control Loom

Post by Ant25 » Mon Apr 30, 2018 10:37 pm

Hi Steve, if they’re still available I’d like to buy a loom please. Z4 E85 3.0i 2005 Roadster .thanks Anthony

Ant25
Newbie
Newbie
Posts: 2
Joined: Mon Apr 30, 2018 10:02 pm

Custom Cruise Control Loom

Post by Ant25 » Mon Apr 30, 2018 10:38 pm

Hi Steve, if they’re still available I’d like to buy a loom please. Z4 E85 3.0i 2005 Roadster. Thanks Anthony

Post Reply