Z4-forum.com

BLACK only air scoops. £35 delivered.

## PAID WITH ##
BLACK
1/. Patriot66 - Black Paid SENT
2/. DarkangelV2 - Black Paid SENT
3/. Confused - Black Paid SENT
4/. TomK - Black Paid SENT
5/. Markeg - Black Paid SENT
6/. Markplant - Black Paid SENT
7/. SrHutch - Black Paid SENT
8/. Marlon - Black Paid SENT
9/. Beng - Black Paid SENT
10/. Jakblade - Black Paid SENT
11/. Mahoney1000 - Black Paid SENT
12/. Roundozo - Black Paid SENT
13/. Alfascozzesi - Black Paid SENT
14/. Stuartt - Black Paid SENT
15/. Gazc - Black Paid SENT
16/. Chrisrush - Black SENT
17/. Andy.c - Black Paid SENT
18/. Ranski - Black Paid SENT
19/. S3nyr - Black Paid SENT
20/Tomhitmanhatton-Black Paid SENT
21/. Ricmb - Black Paid SENT
22/. Doddsy - Black Paid SENT
23/. Jones13 - Black Paid SENT
24/. Perrygunn - Black Paid SENT
25/. LukeM - Black Paid SENT
26/. Trickytris - Black Paid SENT
27/. Jingle - Black Paid SENT
28/. Bamberjim - Black Paid SENT
29/. Rossonr - Black Paid SENT
30/. Gingerninja - Black Paid SENT
31/. Bony_13 - Black Paid SENT
32/. Zikim - Black Paid SENT
33/. Beetlegav - Black Paid SENT
34/. Leesfarm07 - Black Paid SENT
35/. Phil45110 - Black Paid SENT
36/. Yorkie z - Black Paid SENT
37/. Flimper - Black Paid SENT
38/. Kat - Black Paid SENT
39/. Usel - Black Paid SENT
40/. Cossie SI - Black Paid SENT
41/. Radwag - Black Paid SENT
42/. Worcester_Spoon - Black Paid SENT
43/. Simo - Black Paid SENT
44. Spikey - Black Paid SENT
45/. Ant Paid SENT
46/. Nfbr Paid SENT
47/. Hazwaz7 Paid SENT
48/. Stuartc Paid SENT
49/.Mr.tourette Paid SENT
50/. Blade owner Paid SENT
51/. Raiets Paid SENT
52/. Philipw Paid SENT
53/. geresey Paid SENT
54/. Funksta Paid SENT
55/. Swiftly Paid SENT
56/. Nickb1608 Paid SENT
57/. Alpinaboy Paid SENT
58/. Bombardino Paid SENT
59/. neemo Paid SENT
60/. Ctrl-z Paid SENT
61/. MefiEcosse Paid SENT


#### LIST FOR THIRD SET 21/3/16 ####

1/. Cracker offered
2/. philjwb offered x
3/. rayman88 Paid Sent
4/. mark-z4 offered
5/. timmy zoom Paid Sent
6/. simz offered
7/. Bmwjay offered
8/. Biojo Paid Sent
9/. Jabber offered x
10/. Kayjay0_7 Paid Posted
11/. MattyD offered
12/. sahwn_trn offered
13/. Spolit (x6) Paid Sent
14/. Mark_z4 offered
15/. Mr aero Paid Sent
16/. David Paid Sent
17/. Si191 Paid Sent
18/. kic_mike offered
19/. Pete91 offered
20/. Alpinaboy offered


First a massive thanks to ''Jingle'' for his help with this and supplying a scoop as a guide.

I will be making a quantity of these from lightweight aluminium. I will be laser cutting the shape, bending the angles and they will then be sent off to be welded and powder-coated to look like this:

TOP VIEW:


SIDE VIEW:


OTHER SIDE:


FITTED:
[url=http://s328.photobucket.com/user/dans64 ... q.jpg.html][/url

woohoo

and no problem, happy to do my part for the forum!

Red for me to start the list going

Dont want to sound thick but has there been discussion about this on another thread. What are the benefits, how hard to fit and is there a downside etc.
Thanks

Mike6 wrote:Dont want to sound thick but has there been discussion about this on another thread. What are the benefits, how hard to fit and is there a downside etc.
Thanks

No worries, this is the description from a website for the scoop:

''Convert your stock intake system to a ram air type with our ram air scoop. The ram air system captures incoming air from behind the front kidney grill and forces it into the factory intake ducting. The pressured cold air increases engine performance and efficiency. Expect 8-12whp at 70mph winds. Note: Also fits non-M models.''

I'm not sure if there are any downsides, I haven't heard of any.

Installation is straight forward and takes 10-15 minutes max.

Interested but won't this force water up into the filter in wet conditions?

P.s also I'd probably carbon wrap mine if I were to get one.

I'd like one please. Would prefer black powder coat but not fussy.

Roundozo wrote:Interested but won't this force water up into the filter in wet conditions?

This has been discussed on the forum somewhere, apparently it doesn't. Will have a search and see if I can find the thread. From memory it was PVR that said it doesn't force the water up but I could be wrong.

Roundozo wrote:Interested but won't this force water up into the filter in wet conditions?

It's this thread where the same question came up:

viewtopic.php?f=12&t=4711&p=67098&hilit ... ter#p67098

Will this fit a coupe?

Roundozo wrote:Will this fit a coupe?

Yep. Coupe or Roadster

Sorry for the Spanish inquisition but do you know when these would be finished? I keep to a tight budget and about to spend £800 on the zed for DMF, clutch and mtech disks etc and can't afford extra costs at the mo. I would be interested though.

Roundozo wrote:Sorry for the Spanish inquisition but do you know when these would be finished? I keep to a tight budget and about to spend £800 on the zed for DMF, clutch and mtech disks etc and can't afford extra costs at the mo. I would be interested though.

No worries, I'm sure others would've asked the same. Should be ready in a week or two at the most. I can always hold onto one for a few weeks extra if it helps?

Black and Yes please!

If you're willing to ship to the netherlands, I'm interested too (black).

As I recall you're in the sheetmetal cutting business. It might be interesting for you to also make M fang skidplates from aluminium/stainless.
Put it all on ebay too as shipping from the UK to the rest of europe is probably much cheaper than the usual US shipping rates so that puts you to an advantage.