Z4-forum.com

As per a previous post by IAmOrion we're collaborating to make these available to the forum.

The file for the centre console covers is available to download online if you have access to a 3D printer, so feel free to download and print yourself (if you're lucky enough to have one). See the link here.

The part is number 19 in the picture below:
Black (SCHWARZ) # 51167053123
Beige/Cream (BEIGE) # 51167055754
Gray (GRAU) # 51167055753

The material is printed in PLA. So depending on how frequently you access the screws behind the covers, they can become brittle and break. There are a total of 4 covers on the centre console. With this in mind, I'm sending out 6x covers for £8 (including P&P). If you want more than 6 just let me know and I can adjust pricing.

Generally speaking these come in black. So please explicitly specify if you do not want black!

When I get them I'll take some photos of my own, these are James' photos:





I'll be making a list of people I've distributed to, so please feel free to message here, or PM me and I'll put you on the list I have.

Thanks

[reserved]

I need at least two - didn’t realise there may be more

I would like 6 when they are available please kis. tar.

Just to update everyone, I’m expecting delivery of these next week. So I will get in contact with members for payment/delivery details shortly.

Thanks for everyone for the interest and will be PM’ing everyone soon.

Cheers, Kis

Covers have arrived! Pretty good comparison, on the left is an original (and eye wateringly expensive) console cover!
Now I’ve got these, I’ll be contacting everyone that’s registered interest (tomorrow). I appreciate it’s been a little while since my first post!

Some of these are a little rough, due to the printing process! So may need some filing and maybe a Matt or more textured finish if you want? This way it'll be more like the OEM one.

Also unfortunately I only have black covers at present. IMO this doesn't change things too much, I'd personally still want to finish the covers anyway so they will need (IMO) some sanding/primer/paint. So please keep this in mind if you wish to procure some

Many thanks, kis

First batch of covers posted.
Any more questions or interest please contact me

New Year bump... still got quite a few of these! PM me or post on the thread if you're interested or need any more info

UPDATE! New covers are in! These are the cream/beige/white coloured ones. Please see photos below.

N.B. Black cover is an original for comparison purposes.
Please note some have black marks due to the printing process.

As always please contact me if you need either black or white covers. The prices remain the same as the first post and still have plenty in stock.

Thanks!

Hi Kis,
Thanks for your message - didn't realise these were such a common request that someone had the foresight to find a solution!!
Sign me up and let me know what i owe for the trouble!!
Thanks agian!
Louis

Had some of these for mine and my cousins E85 - brilliant fit

Hi Kris, If you still have the beige ones going I'd be interested in a set please

Hi .....Please could i order a set .. Thanks Barry

Phippy wrote: ↑Fri Jun 11, 2021 12:06 am Hi Kis,
Thanks for your message - didn't realise these were such a common request that someone had the foresight to find a solution!!
Sign me up and let me know what i owe for the trouble!!
Thanks agian!
Louis

kis wrote: ↑Mon Oct 12, 2020 9:57 pm The material is printed in PLA. So depending on how frequently you access the screws behind the covers, they can become brittle and break. There are a total of 4 covers on the centre console. With this in mind, I'm sending out 6x covers for £8 (including P&P). If you want more than 6 just let me know and I can adjust pricing.

No problem at all I'll PM you now

Gibon101 wrote: ↑Fri Jun 11, 2021 1:16 pm Hi Kris, If you still have the beige ones going I'd be interested in a set please

I'll PM you now mate