Z4-forum.com

This is just a hobby chaps but I've done a few of these trim refurb for members here and I now live just around the corner from Royals , so I can arrange the whole lot in one go if required .

Ok this is a standard steering wheel that has had the Royals treatment , with new napa leather and Tri Colour stitching and is now M thickness. I have various sets of trims in either matt black or silver fully stripped and refurbished so you can choose what you want . With or without MFSW controls and with or without flappy paddles .
I can supply with the horn ring and wiring fully assembled if required so all you have to do is take your old one off and bolt the new one in place and send me back you old wheel .

Wheel With standard trims ( no MFSW ) black or silver 235.00
Wheel with MFSW trims ( no MFSW buttons ) black or silver 235.00
Wheel with full MFSW trims and buttons , black or silver 315.00

Postage included for my wheel to you, you are responsible for posting your old wheel back to me .

I ask for a deposit of 150.00 on top of the exchange prices above which will be return to you when I get you old wheel returned.

Any questions please feel free to contact me on 07771847714

Some pictures to give you an idea

Stop it your making me want to do my wheel now haha
As the buttons you did for me look better than new
As let's face it a grubby wheel makes a nice car interior look like crap esp on softops

Sent you a pm. Hopefully it sends

Just about to SORN my ///M for winter, wouldn’t mind the full thing doing. Need Xmas out of the way first though.

Looking good those Rob...

Do you mind me asking, what do you paint the plastics with? 2 pack?

Thinking of doing the plastics on mine..

Mike

Ducklakeview wrote: ↑Wed Oct 25, 2017 8:12 pm Looking good those Rob...

Do you mind me asking, what do you paint the plastics with? 2 pack?

Thinking of doing the plastics on mine..

Mike

After seeing your bumper Mike you might want to get Bryan to do it for you

Pastry wrote: ↑Wed Oct 25, 2017 8:25 pm

Ducklakeview wrote: ↑Wed Oct 25, 2017 8:12 pm Looking good those Rob...

Do you mind me asking, what do you paint the plastics with? 2 pack?

Thinking of doing the plastics on mine..

Mike

After seeing your bumper Mike you might want to get Bryan to do it for you

Cheeky fooker, the finish is spot on, shame the paint that they mixed for me was the wrong shade! Although they have replaced it with enough paint, primer, thinner and hardeners for me to be able to do the front and my new rear now!


Anyway, let's stop hijacking Brian's thread

Mike