There you go. That's the project. Do a mock up I think it will be the dogs.Buckley06 wrote: ↑Thu May 17, 2018 10:44 pmI do like the gear gate. I think it would look smart and would be really unique or is that just me lolZ4 COUPSTER wrote: ↑Thu May 17, 2018 10:34 pm : What ideas do you have? What would be something that "floats your boat" I ask as obviously the gear knob was your idea.And having had a few tattoos over the years, I always found the best work is when "the artist" does a take on an idea he wishes to do.
Just my thoughts
Forgot to add the gear change is a work of art.
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
My next project for all of you....
-
- Member
- Posts: 789
- Joined: Sat May 05, 2018 8:08 pm
- Location: Bridgend South Wales
My next project........
Z in da Head.
3.0i Z3 sport,sapphire black,3.0i Z4 roadster Sterling grey,auto,Z4 3.0si Coupe Titanium silver,Stubby &B06 Plus some other German beauties!!
3.0i Z3 sport,sapphire black,3.0i Z4 roadster Sterling grey,auto,Z4 3.0si Coupe Titanium silver,Stubby &B06 Plus some other German beauties!!
- LittleZ4
- Member
- Posts: 708
- Joined: Sun Sep 03, 2017 8:49 am
My next project........
If the gear gate is as good as the gear knob then I'm in. Another idea could be a matching handbrake handle. I'd be in for that
However like the gents above said, if the artist chooses something they would like to make it will most likely be made to a higher standard (the gear knob is a perfect point!)
However like the gents above said, if the artist chooses something they would like to make it will most likely be made to a higher standard (the gear knob is a perfect point!)
3.0i Maldives blue, Coilovers, Bola B1's, Buckley06 Gear knob, Handbrake & Indicator badges, Backbox delete, CDV delete, cupra r splitter, RAM air filter, Bigger Brakes, M3 ARB, SMF.
-
- Member
- Posts: 499
- Joined: Mon Feb 05, 2018 9:17 pm
My next project for all of you....
Ha mine is 5 speed.
I would request a few local people could let me see their box type
I would request a few local people could let me see their box type
- IAmOrion
- Senior Member
- Posts: 1611
- Joined: Mon May 22, 2017 8:29 pm
- Location: Cambridge, UK
My next project for all of you....
I'll no doubt be a minority with this...but, I'd love to see a double din fasciaBuckley06 wrote: ↑Wed May 16, 2018 10:10 pm Firstly can I thank everyone that believed in my last project,
For so many people to buy one just looking at the model was very trusting.
Secondly I was very touched by all the comments from them who did receive a gear knob and them who didn't.
Right now to the point I'm little stuck on my next project.
So I was hoping to get input from you guys on what you would like then I will put the best into a poll.
Please keep in mind that I won't be doing alloys
Or anything that requires electrical engineering.
Thank you
Oliver.
I 3D Printed mine, but have also been looking for other ways of improving it. The problem however would be that double dins have slightly varying bezel shapes & sizes, meaning the cut out section would be super hard to get right. Unless you just made it solid and let buyers cut out the hole for their unit.
Although I don't imagine there'd be much demand due to what's involved with going double din in the first place (eg cutting back or blocking the centre vents etc)
NO LONGER OWN A Z4 SO NOT AS ACTIVE HERE ANYMORE (IF AT ALL).
I STILL OFFER FREE CARLY CODING & EWS KEY/TRANSPONDER CODING AT MY HOME
IN CAMBRIDGE CB22
Facebook: https://www.facebook.com/groups/Z4DIYCustomMods/
I STILL OFFER FREE CARLY CODING & EWS KEY/TRANSPONDER CODING AT MY HOME
IN CAMBRIDGE CB22
Facebook: https://www.facebook.com/groups/Z4DIYCustomMods/
-
- Member
- Posts: 499
- Joined: Mon Feb 05, 2018 9:17 pm
My next project for all of you....
Yeah would look nice but it's more a fabrication job.IAmOrion wrote: ↑Sat May 19, 2018 3:45 pmI'll no doubt be a minority with this...but, I'd love to see a double din fasciaBuckley06 wrote: ↑Wed May 16, 2018 10:10 pm Firstly can I thank everyone that believed in my last project,
For so many people to buy one just looking at the model was very trusting.
Secondly I was very touched by all the comments from them who did receive a gear knob and them who didn't.
Right now to the point I'm little stuck on my next project.
So I was hoping to get input from you guys on what you would like then I will put the best into a poll.
Please keep in mind that I won't be doing alloys
Or anything that requires electrical engineering.
Thank you
Oliver.
I 3D Printed mine, but have also been looking for other ways of improving it. The problem however would be that double dins have slightly varying bezel shapes & sizes, meaning the cut out section would be super hard to get right. Unless you just made it solid and let buyers cut out the hole for their unit.
Although I don't imagine there'd be much demand due to what's involved with going double din in the first place (eg cutting back or blocking the centre vents etc)
-
- Member
- Posts: 499
- Joined: Mon Feb 05, 2018 9:17 pm
My next project for all of you....
Your right I'm going to go with this.Z4 COUPSTER wrote: ↑Thu May 17, 2018 11:39 pmThere you go. That's the project. Do a mock up I think it will be the dogs.Buckley06 wrote: ↑Thu May 17, 2018 10:44 pmI do like the gear gate. I think it would look smart and would be really unique or is that just me lolZ4 COUPSTER wrote: ↑Thu May 17, 2018 10:34 pm : What ideas do you have? What would be something that "floats your boat" I ask as obviously the gear knob was your idea.And having had a few tattoos over the years, I always found the best work is when "the artist" does a take on an idea he wishes to do.
Just my thoughts
Forgot to add the gear change is a work of art.
It's going to take a lot of work and hopefully some help you people on here but I think it can be done.
I will make a start on it early next month.
-
- Member
- Posts: 789
- Joined: Sat May 05, 2018 8:08 pm
- Location: Bridgend South Wales
My next project for all of you....
We'll done Oliver. Trust me it will be a work of art. I can't wait to see it. Put me down for one as well please. I don't want to be in gear knob land again lol.Buckley06 wrote: ↑Tue May 22, 2018 7:01 pmYour right I'm going to go with this.Z4 COUPSTER wrote: ↑Thu May 17, 2018 11:39 pmThere you go. That's the project. Do a mock up I think it will be the dogs.
It's going to take a lot of work and hopefully some help you people on here but I think it can be done.
I will make a start on it early next month.
Z in da Head.
3.0i Z3 sport,sapphire black,3.0i Z4 roadster Sterling grey,auto,Z4 3.0si Coupe Titanium silver,Stubby &B06 Plus some other German beauties!!
3.0i Z3 sport,sapphire black,3.0i Z4 roadster Sterling grey,auto,Z4 3.0si Coupe Titanium silver,Stubby &B06 Plus some other German beauties!!
-
- Member
- Posts: 499
- Joined: Mon Feb 05, 2018 9:17 pm
My next project for all of you....
Sure I will.Z4 COUPSTER wrote: ↑Tue May 22, 2018 7:05 pmWe'll done Oliver. Trust me it will be a work of art. I can't wait to see it. Put me down for one as well please. I don't want to be in gear knob land again lol.Buckley06 wrote: ↑Tue May 22, 2018 7:01 pmYour right I'm going to go with this.Z4 COUPSTER wrote: ↑Thu May 17, 2018 11:39 pm There you go. That's the project. Do a mock up I think it will be the dogs.
It's going to take a lot of work and hopefully some help you people on here but I think it can be done.
I will make a start on it early next month.
This is not going to be as quick as the gear knobs though it will take a bit of time to get prototypes done fitted and tested.
-
- Member
- Posts: 789
- Joined: Sat May 05, 2018 8:08 pm
- Location: Bridgend South Wales
My next project for all of you....
I'm sure with your talent and time it will be awesome.
I'm glad I could be of help on the decision.
We'll done bud
I'm glad I could be of help on the decision.
We'll done bud
Z in da Head.
3.0i Z3 sport,sapphire black,3.0i Z4 roadster Sterling grey,auto,Z4 3.0si Coupe Titanium silver,Stubby &B06 Plus some other German beauties!!
3.0i Z3 sport,sapphire black,3.0i Z4 roadster Sterling grey,auto,Z4 3.0si Coupe Titanium silver,Stubby &B06 Plus some other German beauties!!
- LittleZ4
- Member
- Posts: 708
- Joined: Sun Sep 03, 2017 8:49 am
My next project for all of you....
Put me down for one fella, keep this up and there'll be forum cars full of your work
3.0i Maldives blue, Coilovers, Bola B1's, Buckley06 Gear knob, Handbrake & Indicator badges, Backbox delete, CDV delete, cupra r splitter, RAM air filter, Bigger Brakes, M3 ARB, SMF.
-
- Member
- Posts: 499
- Joined: Mon Feb 05, 2018 9:17 pm
My next project for all of you....
Cheers man.
Of they cost £2000 each
I will need to work the price when the prototypes are completed, but I know they will cost quite a bit more than the gear knobs.
- LittleZ4
- Member
- Posts: 708
- Joined: Sun Sep 03, 2017 8:49 am
My next project for all of you....
Keep us posted Will have to see what I can justify spending. Brakes upgrade/rebuild is costing more than I thought lol
3.0i Maldives blue, Coilovers, Bola B1's, Buckley06 Gear knob, Handbrake & Indicator badges, Backbox delete, CDV delete, cupra r splitter, RAM air filter, Bigger Brakes, M3 ARB, SMF.
- kis
- Lifer
- Posts: 4546
- Joined: Wed Jul 20, 2016 2:33 pm
- Location: Surrey / West Sussex Boarder
My next project for all of you....
What about keyrings? Customised to read Z4
My E85 Z4 3.0i SMG
BMW Family History (past and present):
1 Series - E87
3 Series - E46 Coupe, E46 M3, E90 (x3)
4 Series - F36, F82 M4
5 Series - E34 (x2), E39
7 Series - E32
X5 - E53, E70
X6 - E71
BMW Family History (past and present):
1 Series - E87
3 Series - E46 Coupe, E46 M3, E90 (x3)
4 Series - F36, F82 M4
5 Series - E34 (x2), E39
7 Series - E32
X5 - E53, E70
X6 - E71
-
- Member
- Posts: 499
- Joined: Mon Feb 05, 2018 9:17 pm
My next project for all of you....
Yeah not a bad idea, Could be a nice gesture at some point.
- Davz
- Member
- Posts: 507
- Joined: Mon Jul 10, 2017 8:35 pm
- Location: Wellington, Shropshire
My next project for all of you....
Oli, firstly got to say the gear knob is a delight to use and looks so very cool....cheers once again.
I'd also be interested in a gear lever gait in stainless but to finish off the interior the hand brake is also a must. I would've thought the handbrake would be the easist of the two and quite a few forum members are asking for that. Why not crack the easy job first and have the gear gait as a longer term job?
I am being purely selfish as i'd like a matching handbrake now!
I'd also be interested in a gear lever gait in stainless but to finish off the interior the hand brake is also a must. I would've thought the handbrake would be the easist of the two and quite a few forum members are asking for that. Why not crack the easy job first and have the gear gait as a longer term job?
I am being purely selfish as i'd like a matching handbrake now!
2006 2.5 Monaco blue, orange footwell lights, Blue boot lights, 20/15mm wheel spacers, Buckley06 gear knob, Aux, MV2's, M pedals, Eibachs, Bilstein B4's, Whiteline front ARB. H&R rear ARB. Roof motor relocated, Alpine speakers, Xenons.