Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Service interval display reset
- sp3ctre
- Site Admin
- Posts: 7492
- Joined: Thu Jun 14, 2007 7:29 pm
- Contact:
- sp3ctre
- Site Admin
- Posts: 7492
- Joined: Thu Jun 14, 2007 7:29 pm
- Contact:
Or the summary without all the c**:
1. Key in 0 or off position.
2. Press and hold odometer button and turn key to 1 or acc. position.
3. Keep button pressed until any of the following words appear in display: "oil service" or "inspection", with "reset" or "re". For vehicles with "high cluster", the fuel amount (in litres) remaining until next service is displayed (i.e. 3224).
4. Press and hold button again until "reset" or "re" flash. If there is no "flash", minimum consumption value has not been met.
5. While display is flashing, press button briefly to reset service interval indicator. After display has shown new interval,you can turn ignition off... next time you start the car it will have the new mileage left to service!
Just done it... works fine!
1. Key in 0 or off position.
2. Press and hold odometer button and turn key to 1 or acc. position.
3. Keep button pressed until any of the following words appear in display: "oil service" or "inspection", with "reset" or "re". For vehicles with "high cluster", the fuel amount (in litres) remaining until next service is displayed (i.e. 3224).
4. Press and hold button again until "reset" or "re" flash. If there is no "flash", minimum consumption value has not been met.
5. While display is flashing, press button briefly to reset service interval indicator. After display has shown new interval,you can turn ignition off... next time you start the car it will have the new mileage left to service!
Just done it... works fine!