Hi Guys,
My nav screen's plastic case broke on the left hinge and also opened apart where the screen's front and back case meet. I would like to attempt to fix this or replace it but can't seem to find any instructions on how to access the de-assembly points in order to pop the screen out from the top of my dashboard.
Your help would be greatly appreciated, thanks!
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Help needed in de-assemling the navigation screen
-
- Newbie
- Posts: 2
- Joined: Fri Dec 25, 2009 7:22 pm
- pvr
- Legend
- Posts: 26156
- Joined: Fri Jun 15, 2007 12:27 pm
- Location: South East UK
Re: Help needed in de-assemling the navigation screen
Remove the airvent above the radio.
Remove the radio.
Remove two screws which are in the bracket in the opening where the legs of the screen rest on.
Remove the rear plastic clip of the screen nearest to the windscreen, just clips in.
Remove the 2 screws which are exposed once you remove the plastic strip at the rear.
Screen is now lose and can be lifted up through the hole.
Disconnect single connector and screen is free.
Remove the radio.
Remove two screws which are in the bracket in the opening where the legs of the screen rest on.
Remove the rear plastic clip of the screen nearest to the windscreen, just clips in.
Remove the 2 screws which are exposed once you remove the plastic strip at the rear.
Screen is now lose and can be lifted up through the hole.
Disconnect single connector and screen is free.
Current:
911-50 Black - unique spec
X5M - 575 hp of fun in a V8
Abarth 595 Comp.
Golf Clipper - collectors item
Z4 3.0si Black Sapphire
VW ID.3
Previous:
Z4M Silver Grey - non flimper spec (gone to Bing)
Z4 3.0 Toledo
911-50 Black - unique spec
X5M - 575 hp of fun in a V8
Abarth 595 Comp.
Golf Clipper - collectors item
Z4 3.0si Black Sapphire
VW ID.3
Previous:
Z4M Silver Grey - non flimper spec (gone to Bing)
Z4 3.0 Toledo
- Zed Five
- Senior Member
- Posts: 2290
- Joined: Thu Aug 20, 2009 1:58 pm
Re: Help needed in de-assemling the navigation screen
... and you need to push up the unit from under the right hand side first if I recall?
- the motor is sort of slotted under the left hand side, so you push up the right and 'feed' out.
- the motor is sort of slotted under the left hand side, so you push up the right and 'feed' out.
Why is it that people who can't take advice always insist on giving it?
E89 35is | BMW S1000rr Motorsport Ed.
E89 35is | BMW S1000rr Motorsport Ed.
-
- Newbie
- Posts: 2
- Joined: Fri Dec 25, 2009 7:22 pm
Re: Help needed in de-assemling the navigation screen
thanks guys, appreciate it. was out of town for a couple of days, will try it out and keep u posted!