Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

BMW Z4 Windblock/screen

How-To articles are in here. Please use sub-forum for requests
Post Reply
memphisz4
Newbie
Newbie
Posts: 8
Joined: Fri Nov 13, 2009 2:28 pm

BMW Z4 Windblock/screen

Post by memphisz4 » Tue Nov 17, 2009 1:05 am

Hello from Memphis, TN. USA!

Has anyone installed the BMW Z4 windscreen/mesh block that fits between the 2 roll bars?

It requires that the 2 roll bars covers be removed and replaced....

Can you please help me? How do you remove the 2 roll bar covers and install the new ones?

Thank you very much!

Bob

User avatar
srhutch
Moderator
Moderator
Posts: 26959
Joined: Tue Jun 19, 2007 1:22 pm
Location: East Sussex, UK
Contact:

Re: BMW Z4 Windblock/screen

Post by srhutch » Tue Nov 17, 2009 8:58 am

Basically you need to lever the old one off using a screwdrive or similar, the tabs will break thats for sure, but you need to replace all four if you are going to install the blockers between the hoops as well.

There is a how to on zpost.com
Image

memphisz4
Newbie
Newbie
Posts: 8
Joined: Fri Nov 13, 2009 2:28 pm

Re: BMW Z4 Windblock/screen

Post by memphisz4 » Tue Nov 17, 2009 12:10 pm

srhutch wrote:Basically you need to lever the old one off using a screwdrive or similar, the tabs will break thats for sure, but you need to replace all four if you are going to install the blockers between the hoops as well.

There is a how to on zpost.com

Thank you srhutch!

Ran some searches and cant seem to locate the zpost how-to?
Can you help point me to the post?
Thank you very much!
Bob

Post Reply