Help with replacement hood motor

PHILGZ4 · Post by **PHILGZ4** » Thu May 16, 2019 1:24 pm

I have already had my motor moved to the boot last year and was working great but it now need's a wee push when it opens then works fine rest of the way.It closes perfectly.
Does anyone think this could be the hydraulic oil is low?. Going to snip the cable tie and check it this weekend as it's been put in pretty tight and cant get to the top up bit as its facing the rear seat. i did find some oil on a piece of paper towel i put underneath it so could it be leaking or would this be the WD40 that was sprayed on it?. failing this a wee day trip to Durham and contact Dave.

Cheryl70 · Post by **Cheryl70** » Mon Oct 14, 2019 7:31 pm

How can I contact bowser134. I need my zed4 hood motor repaired.

Cheryl70 · Post by **Cheryl70** » Mon Oct 14, 2019 7:48 pm

I have not used a forum before and don’t know how on contact another member.

Cheryl70 · Post by **Cheryl70** » Mon Oct 14, 2019 7:49 pm

I am hoping this will enable me to pm bowser134

Mr Tidy · Post by **Mr Tidy** » Mon Oct 14, 2019 8:23 pm

That should do it Cheryl.

You could always post an introduction in the Newbies section too!

Smartbear · Post by **Smartbear** » Mon Oct 14, 2019 8:27 pm

Cheryl70 wrote: ↑Mon Oct 14, 2019 7:49 pm I am hoping this will enable me to pm bowser134

Hi, after 3 posts (which you now have) you can pm another forum member

Rob

Number5 · Post by **Number5** » Mon Oct 14, 2019 8:39 pm

Delted as irrelevant !

Alan

Number5 · Post by **Number5** » Mon Oct 14, 2019 8:43 pm

Forget the above !
I've just realised that the OP was some time back and Cheryl is picking up on an old thread !
(I'll still message Bowser (Ross) for you though)

Z4-forum.com

Z4-forum.com