Newbie - 1st time ever on a forum - Help required - Flat Tyre Warning Light

Josie · Post by **Josie** » Wed Mar 13, 2019 2:15 pm

Hi,

My flat Tyre Warning light came on, and I went to the service station to check them and had to top 3 up to the recommended level as they were slightly low (I think that is how the previous owner liked them) and had to add a good bit to one of the others. Now my warning light will not go off, please advise what my next action should be.

Many thanks Josie

Phoenixboy · Post by **Phoenixboy** » Wed Mar 13, 2019 2:22 pm

may help to say which model.
will likely need to reset the tyre pressure monitoring button.

greg81 · Post by **greg81** » Wed Mar 13, 2019 2:23 pm

If you've filled then with air you can press and hold it to reset the light

Josie · Post by **Josie** » Wed Mar 13, 2019 3:30 pm

Z4 E85 05 reg. Thank you

Crazy Harry · Post by **Crazy Harry** » Wed Mar 13, 2019 5:22 pm

Instructions

: Tyre reset.jpg (104.23 KiB) Viewed 551 times

and once you've done that why not start a newbie thread with some photos of your Zed?

buzyg · Post by **buzyg** » Wed Mar 13, 2019 7:07 pm

Welcome to the forum Josie.

Seems you got it sorted.

Maybe pop an introduction in the newbies forum and tell us nosey lot at bit more about your Zed.

Mr Tidy · Post by **Mr Tidy** » Wed Mar 13, 2019 8:58 pm

Hi and welcome.

I hope you've got the light off now.

Anyway you could always post some photos of your car - we rather like to see them on here.

Z4-forum.com

Z4-forum.com