Z4-forum.com

You could try emailing Alan Hook at KW. He might be able to find the answers you require. He was very helpful I had a leaking damper in 2020.

[email protected]

BMWZ4MC wrote: ↑Sat Nov 18, 2023 11:01 pm You could try emailing Alan Hook at KW. He might be able to find the answers you require. He was very helpful I had a leaking damper in 2020.

[email protected]

Great I’ll give it a go, when I called I spoke to two different people at kw on the phone and neither of them were sure what I was asking.

Thanks

InterlagosMC wrote: ↑Sat Nov 18, 2023 5:01 pm Thanks for the reply, from my understanding the clubsports have a different Mount tab position to the v3 setup which again changes the lengths, I just can’t find a definitive answer annoyingly, will just have to wait until I’m fitting it all and then check for myself.

Sorry for the delay in replying Inter. No idea if you’re sorted but basically when you buy a set of KW’s, what you need to do is turn the foam packaging inserts over and the drop links are under there…..I know I know….

john-e89 wrote: ↑Tue Dec 19, 2023 7:24 pm

InterlagosMC wrote: ↑Sat Nov 18, 2023 5:01 pm Thanks for the reply, from my understanding the clubsports have a different Mount tab position to the v3 setup which again changes the lengths, I just can’t find a definitive answer annoyingly, will just have to wait until I’m fitting it all and then check for myself.

Sorry for the delay in replying Inter. No idea if you’re sorted but basically when you buy a set of KW’s, what you need to do is turn the foam packaging inserts over and the drop links are under there…..I know I know….

So you're all sorted,John
Cars mods are coming on well. Some nice APs there

john-e89 wrote: ↑Tue Dec 19, 2023 7:24 pm

InterlagosMC wrote: ↑Sat Nov 18, 2023 5:01 pm Thanks for the reply, from my understanding the clubsports have a different Mount tab position to the v3 setup which again changes the lengths, I just can’t find a definitive answer annoyingly, will just have to wait until I’m fitting it all and then check for myself.

Sorry for the delay in replying Inter. No idea if you’re sorted but basically when you buy a set of KW’s, what you need to do is turn the foam packaging inserts over and the drop links are under there…..I know I know….

Ironically the set arrived this afternoon and I didn’t even see the links in there until I saw your comment, in answer to my original question the links they send are 235mm long for anyone else who may have this same issue, time to send the ones I ordered back and get some shorter links

Bit late to the party, but I had to replace my v3 drop links, and after chasing around KW and Meyle, I fitted the Meyle 316 060 001/HD