Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
DSP Adapter questions
-
sk93
- Lifer
- Posts: 3970
- Joined: Mon Oct 19, 2009 9:20 pm
- Location: Nottingham
- Contact:
-
sammysquid
- Member
- Posts: 251
- Joined: Sat Feb 15, 2014 1:33 pm
Re: DSP Adapter questions
Why don't you put the Denison in the glove box? Then you don't need to remove any if the rear trim and is easy to access if you want to plug and unplug
-
relic222
- Member
- Posts: 118
- Joined: Wed Mar 26, 2014 8:26 pm
Re: DSP Adapter questions
The Dension is up front (currently behind the radio because I don't think I'll need to access it in the future) however the amp is in the boot. The DSP converter needs to be in the boot with the amp but a cable runs from that, up front to the dension unit (which needs to be plugged into the radio). It's the cable running from the converter to the Dension that needs to go under the trim. At least, that's what I think we're doing, sk93 may tell me otherwise!sammysquid wrote:Why don't you put the Denison in the glove box? Then you don't need to remove any if the rear trim and is easy to access if you want to plug and unplug
-
sk93
- Lifer
- Posts: 3970
- Joined: Mon Oct 19, 2009 9:20 pm
- Location: Nottingham
- Contact:
Re: DSP Adapter questions
correct - possibly.
it depends on a few factors, but I believe that will be the solution.
we'll nail it Sunday
it depends on a few factors, but I believe that will be the solution.
we'll nail it Sunday
-
relic222
- Member
- Posts: 118
- Joined: Wed Mar 26, 2014 8:26 pm
Re: DSP Adapter questions
I'm loving the confidence!sk93 wrote:correct - possibly.
it depends on a few factors, but I believe that will be the solution.
we'll nail it Sunday
-
sk93
- Lifer
- Posts: 3970
- Joined: Mon Oct 19, 2009 9:20 pm
- Location: Nottingham
- Contact:
Re: DSP Adapter questions
I believe the confidence was well placed
Job done and a seemingly happy new member
Cheers for lunch Relic222 - was good to meet you!
Hope you enjoy that commute a tad more
Job done and a seemingly happy new member
Cheers for lunch Relic222 - was good to meet you!
Hope you enjoy that commute a tad more
-
hopz121
- Lifer
- Posts: 3712
- Joined: Sun Jul 03, 2011 4:33 pm
- Location: Guildford Surrey
Re: DSP Adapter questions
Good to see this all worked out ok 
Well done sk93 helping another member out yet again
Well done sk93 helping another member out yet again 2004 BMW E46 M3 Coupe - Manual - Silver Grey
2017 BMW F31 318d M-Sport - Auto - Glacier Silver
2007 Porsche Cayman 2.7 - Manual - Arctic Silver
2003 Renault Clio 172 Cup - Blue
2003 BMW E85 Z4 3.0i - Gone
2008 BMW E90 330i SE - Gone
2017 BMW F31 318d M-Sport - Auto - Glacier Silver
2007 Porsche Cayman 2.7 - Manual - Arctic Silver
2003 Renault Clio 172 Cup - Blue
2003 BMW E85 Z4 3.0i - Gone
2008 BMW E90 330i SE - Gone
-
relic222
- Member
- Posts: 118
- Joined: Wed Mar 26, 2014 8:26 pm
Re: DSP Adapter questions
Been meaning to get on the forum to thank you again but it's been a busy week! Once again, a big thank you to sk93, that was above and beyond the call of duty! The Dension is now working brilliantly and I've enabled the text mode so everything is good in Z4 world once again. Also, during the install it was discovered that I actually have the Carver unit rather than the mid range unit so another win.
It was nice to meet you sk93, had some good chats and hopefully I'll be seeing you on Elite at some point
The commute was much nicer, not having the same CD on loop all the time! Let me know how the Eibachs are, that could be going on the list of mods in the future.
It was nice to meet you sk93, had some good chats and hopefully I'll be seeing you on Elite at some point
The commute was much nicer, not having the same CD on loop all the time! Let me know how the Eibachs are, that could be going on the list of mods in the future.