Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Roof & Window issue after fitting regulator
- wilbo
- Member
- Posts: 718
- Joined: Sat Nov 30, 2013 7:27 pm
- Location: Berkshire
Roof & Window issue after fitting regulator
Fitted a passenger regulator at the weekend as the old one was knackered. Obviously had to disconnect the battery due to the airbag, which has resulted in two problems:
1) Firstly, the auto up on the passenger window does not work. Guess this was an extra feature programmed in but lost by disconnecting battery. Any way to get this back?
2) Main issue here. When I put the roof down, the windows drop half way, roof goes back then only the drivers window goes back up, passenger window stays half down. If I move the passenger window up or down, the roof light starts flashing. I then hold the roof button again until it stops flashing, and the drivers window will close but it does nothing to the passenger window.
I have spent almost 30 minutes trying various window reset procedures from threads on here but this hasn't done a thing and hasn't cured the above. Starting to get pretty fed up with this car, its a good job I love driving it.
1) Firstly, the auto up on the passenger window does not work. Guess this was an extra feature programmed in but lost by disconnecting battery. Any way to get this back?
2) Main issue here. When I put the roof down, the windows drop half way, roof goes back then only the drivers window goes back up, passenger window stays half down. If I move the passenger window up or down, the roof light starts flashing. I then hold the roof button again until it stops flashing, and the drivers window will close but it does nothing to the passenger window.
I have spent almost 30 minutes trying various window reset procedures from threads on here but this hasn't done a thing and hasn't cured the above. Starting to get pretty fed up with this car, its a good job I love driving it.
- wilbo
- Member
- Posts: 718
- Joined: Sat Nov 30, 2013 7:27 pm
- Location: Berkshire
Re: Roof & Window issue after fitting regulator
Anyone have this issue and got a solution?
- rish13
- Member
- Posts: 83
- Joined: Fri Feb 28, 2014 12:53 pm
- Location: North London
Re: Roof & Window issue after fitting regulator
Hey Wilbo,wilbo wrote:Fitted a passenger regulator at the weekend as the old one was knackered. Obviously had to disconnect the battery due to the airbag, which has resulted in two problems:
1) Firstly, the auto up on the passenger window does not work. Guess this was an extra feature programmed in but lost by disconnecting battery. Any way to get this back?
2) Main issue here. When I put the roof down, the windows drop half way, roof goes back then only the drivers window goes back up, passenger window stays half down. If I move the passenger window up or down, the roof light starts flashing. I then hold the roof button again until it stops flashing, and the drivers window will close but it does nothing to the passenger window.
I have spent almost 30 minutes trying various window reset procedures from threads on here but this hasn't done a thing and hasn't cured the above. Starting to get pretty fed up with this car, its a good job I love driving it.
I had the same problem last weekend. The windows just went weird and started dancing!
What I did was;
1. Close the roof entirely
2. Drop the windows down all the way
3. Lift the windows up together (not on auto mode) all the way and continue holding the window switches up for about 10-15 seconds after the windows had closed fully.
That worked for me, hopefully it does for you too.
3.0 Si SE Roadster, Montego Blue
-
- Member
- Posts: 753
- Joined: Fri Oct 26, 2012 5:36 pm
Re: Roof & Window issue after fitting regulator
yes this is the window reset you have to this after disconnecting the battery
GT
GT
- wilbo
- Member
- Posts: 718
- Joined: Sat Nov 30, 2013 7:27 pm
- Location: Berkshire
Re: Roof & Window issue after fitting regulator
As above, I have tried multiple window resets including those mentioned, but will try again this evenng.
- Chezsherman
- Member
- Posts: 622
- Joined: Sun Jan 05, 2014 7:19 pm
- Location: Newcastle upon Tyne
Re: Roof & Window issue after fitting regulator
Mine also (passenger auto up has stopped working the window doesn't move if u press it for normal but does if u press fully (for the auto up).
Previous car Bmw z4 2.0i sport 07 plate, sapphire black, M sport interior. now with Gaptech RCH+ module, MTec drilled and grooved disks, MV1 alloys in a dark chrome finish.
Current car E89 2014 20i sdrive msport with idrive.
Current car E89 2014 20i sdrive msport with idrive.
- wilbo
- Member
- Posts: 718
- Joined: Sat Nov 30, 2013 7:27 pm
- Location: Berkshire
Re: Roof & Window issue after fitting regulator
Still got this issue. With roof down button held in, both windows lower half way, roof opens fully and drivers window goes back up but passenger window stays down. Is this normal or should it go back up?
The flashing red light stays off until I move the passenger window either up or down, and then it starts flashing. The only way to get it to stop flashing is to hold the roof down button and the drivers window goes up, but passenger doesnt move.
I have tried to reset the window about 30 times now and the above still occurs so it can't be that.
The flashing red light stays off until I move the passenger window either up or down, and then it starts flashing. The only way to get it to stop flashing is to hold the roof down button and the drivers window goes up, but passenger doesnt move.
I have tried to reset the window about 30 times now and the above still occurs so it can't be that.
- Smartbear
- Lifer
- Posts: 13685
- Joined: Wed Feb 05, 2014 6:54 pm
- Location: a barn in Somerset
Re: Roof & Window issue after fitting regulator
When you try resetting the one touch window up/down function do you have the door shut? The teach procedure doesn't work with the door open (don't ask me how I know this)
Regards
Regards
e89 Sdrive 20i, plenty of mumbo & good economy-the thinking bears z4
e89 Sdrive 30i, this ones busted, pass me another...
e85 3.0si sold
-
- Senior Member
- Posts: 1441
- Joined: Fri Sep 23, 2011 3:10 am
Re: Roof & Window issue after fitting regulator
Right. I have exactly the same problem with mine after fitting another passenger door. Mine won't reset either.
I recently bought the bmw software and interface (forget what it's called)
But there was a code saying something about the windows sensor (whatever makes the window go back down when resistance is detected ie your hand getting stuck) being faulty. I'm guessing the sensor is part of the motor but haven't actually investigated it yet. So maybe you've disturbed/replaced the sensor maybe you know more than I do, but it won't let your (or at least my) window reset because it won't be able to detect anything restricting the glass and possibly causing harm.
I recently bought the bmw software and interface (forget what it's called)
But there was a code saying something about the windows sensor (whatever makes the window go back down when resistance is detected ie your hand getting stuck) being faulty. I'm guessing the sensor is part of the motor but haven't actually investigated it yet. So maybe you've disturbed/replaced the sensor maybe you know more than I do, but it won't let your (or at least my) window reset because it won't be able to detect anything restricting the glass and possibly causing harm.
-
- Senior Member
- Posts: 1873
- Joined: Tue Aug 13, 2013 7:11 pm
- Location: Rotherham
Re: Roof & Window issue after fitting regulator
Hi Guys,
HAVE BOTH DOORS CLOSED
To reset the window regulator, put the window all the way down and hold the button for 6 seconds (it should take 5 sec but I did 6) this worked when i had to reset mine.... deff worth a try! no harm
good luck
HAVE BOTH DOORS CLOSED
To reset the window regulator, put the window all the way down and hold the button for 6 seconds (it should take 5 sec but I did 6) this worked when i had to reset mine.... deff worth a try! no harm
good luck
- wilbo
- Member
- Posts: 718
- Joined: Sat Nov 30, 2013 7:27 pm
- Location: Berkshire
Re: Roof & Window issue after fitting regulator
Have had both doors closed every time I have tried the reset and held it for 5, 10, 15, 20.... seconds. Literally tried every single way and the window still stays in the middle and causes the roof light to flash.
What does the reset actually do? Let the regulator know where the top is so that when you put the roof down it returns to the top??
What does the reset actually do? Let the regulator know where the top is so that when you put the roof down it returns to the top??
- Smartbear
- Lifer
- Posts: 13685
- Joined: Wed Feb 05, 2014 6:54 pm
- Location: a barn in Somerset
Re: Roof & Window issue after fitting regulator
On my car resetting the windows re-enabled one touch opening/closing which it lost after I changed the battery.wilbo wrote:Have had both doors closed every time I have tried the reset and held it for 5, 10, 15, 20.... seconds. Literally tried every single way and the window still stays in the middle and causes the roof light to flash.
What does the reset actually do? Let the regulator know where the top is so that when you put the roof down it returns to the top??
Regards
e89 Sdrive 20i, plenty of mumbo & good economy-the thinking bears z4
e89 Sdrive 30i, this ones busted, pass me another...
e85 3.0si sold
-
- Senior Member
- Posts: 1441
- Joined: Fri Sep 23, 2011 3:10 am
Re: Roof & Window issue after fitting regulator
Did you read my reply above?wilbo wrote:Have had both doors closed every time I have tried the reset and held it for 5, 10, 15, 20.... seconds. Literally tried every single way and the window still stays in the middle and causes the roof light to flash.
What does the reset actually do? Let the regulator know where the top is so that when you put the roof down it returns to the top??
- wilbo
- Member
- Posts: 718
- Joined: Sat Nov 30, 2013 7:27 pm
- Location: Berkshire
Re: Roof & Window issue after fitting regulator
Finally got this sorted today with the help of Z4Golfers info in this thread below:
http://www.z4-forum.com/forum/viewtopic.php?f=12&t=190
For reference, I followed this procedure:
1. Open the window fully and when it had reaches the bottom, press the button a further four times.
2. Then close the window fully and hold the button up for a second or so.
3. Then open the window by approximately four inches, and then closed it again and hold the button for a second again.
So glad I finally found a procedure that worked.
http://www.z4-forum.com/forum/viewtopic.php?f=12&t=190
For reference, I followed this procedure:
1. Open the window fully and when it had reaches the bottom, press the button a further four times.
2. Then close the window fully and hold the button up for a second or so.
3. Then open the window by approximately four inches, and then closed it again and hold the button for a second again.
So glad I finally found a procedure that worked.
- Smartbear
- Lifer
- Posts: 13685
- Joined: Wed Feb 05, 2014 6:54 pm
- Location: a barn in Somerset
Re: Roof & Window issue after fitting regulator
The doors must also be closed for window teaching to work.wilbo wrote:Finally got this sorted today with the help of Z4Golfers info in this thread below:
http://www.z4-forum.com/forum/viewtopic.php?f=12&t=190
For reference, I followed this procedure:
1. Open the window fully and when it had reaches the bottom, press the button a further four times.
2. Then close the window fully and hold the button up for a second or so.
3. Then open the window by approximately four inches, and then closed it again and hold the button for a second again.
So glad I finally found a procedure that worked.
Regards
e89 Sdrive 20i, plenty of mumbo & good economy-the thinking bears z4
e89 Sdrive 30i, this ones busted, pass me another...
e85 3.0si sold