Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Car going into limp mode at high RPM
-
JackBabinski
- Newbie
- Posts: 4
- Joined: Sun Aug 27, 2023 6:02 pm
Car going into limp mode at high RPM
The other day I was sending my car kinda hard down the road holding it at about 6k rpm and as I was accelerating the engine suddenly started chugging and power was greatly reduced. I was able to pull to the side and restarted the car and the issue went away. It happened again just recently under the same circumstances and restarting fixed it again. I checked it out with my code reader and both times I got “DME inlet camshaft position sensor: signal duration” as well as multiple misfires. I assume a bad sensor but what can I do to test it?
-
enuff_zed
- Lifer
- Posts: 14979
- Joined: Wed Oct 26, 2016 11:05 am
- Location: Attleborough, Norfolk
Car going into limp mode at high RPM
My suggerstion would simply be to change the sensor.
HQ of 'Norfolk Zed Rescue'.
Always happy to help if I can.
If the forum helped you, why not help the forum back. Thats the Z4 way!
Always happy to help if I can.
If the forum helped you, why not help the forum back. Thats the Z4 way!
-
dabshu
- Newbie
- Posts: 11
- Joined: Thu Aug 10, 2023 12:40 pm
Car going into limp mode at high RPM
Had my 08 DCt out nowadays become walking satisfactory, however at higher RPM 7k it kicked into limp mode and lit up like a Christmas tree. Turned it off and began it returned on and the whole lot was regular, then it stalled. Started returned up no problems. At one point after I elevated in limp mode it'd no longer cross, had to tug over and flip lower back on.