Appreciate this is a very old thread now however the photo of the screwdriver pushing up on the metal tabs is bloody misleading and in my opinion should be removed from the forum ...JackB1 wrote:Here is how I removed mine - it does take someone holding two screwdrivers that are pushing up the metal clips. Then you have your hands free to pull the vent assembly straight out towards you. I got a piece of string through, around the back and out again (string not shown), then pulled on the strings until it came out.
It is like everything else associated with removing in terior parts. unless you have done it before, you really don't know how the fastners work - you really risk breaking things due to the unknown!
Here are some pics -
Hope this helps!
Best!
Jack
The OP should have made it very very clear at the beginning of the post that the metal tabs require pulling down, not PUSHING UP.
By following this post I managed to lock the metal tabs upwards on my Zed and ended up having to wrench the centre vent unit out and causing the plastic edge of the centre vent unit to warp. Not a massive issue as the centre vent unit needs replacing anyway as one of the air flap dials is faulty ... I just don't want anyone else to end up in the same predicament I was ...