Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Retrofit Cupholders (half finished!)
- Wondermike
- Moderator
- Posts: 10497
- Joined: Fri Jun 15, 2007 10:16 pm
Retrofit Cupholders (half finished!)
Prise off blanking plate
Unscrew screw
Prise little rubber cap off and remove screw
Pull out air vent assembly
Insert cupholder and fix with screws
Put back bottom screw
Put back top screw
Search everywhere for little rubber cap
Put back little rubber cap
- outrun
- Member
- Posts: 694
- Joined: Tue Sep 18, 2007 10:44 am
Re: Retrofit Cupholders (half finished!)
Mike, where did you get the cupholders? I didn't spec them and on my recent trip to Monaco my friend did nothing but moan about the lack of cupholders. CSL wheels, CDV, Eibach springs, remap, pogo alert, fancy ipod connector, Iphone cradle, and NO CUPHOLDERS!
Cheers
Cheers
2007 z4mc carbon black - gone but not forgotten. The guy I sold to still has it, maybe one day I will buy it back.
Now - Maserati Gransport with many mods. Sounds incredible.
Now - Maserati Gransport with many mods. Sounds incredible.
- X-S-Z
- Member
- Posts: 358
- Joined: Thu Apr 17, 2008 5:30 pm
- Location: Baku, Azerbaijan
Re: Retrofit Cupholders (half finished!)
Is it a worthwhile mod? I've had similar complaints from passengers akin to outrun, but have noticed a lot of forum members complaining about them as being useless? I am not keen on the appearance of the ultimate cup holder, I like the OEM idea that its hidden when not in use.
Current: Imola red Z4MR
Previous: Z4 3.0i SE, 118d SE
Previous: Z4 3.0i SE, 118d SE
- paddy wright
- Lifer
- Posts: 7704
- Joined: Sun Jan 06, 2008 1:00 pm
- Location: south yorkshire
Re: Retrofit Cupholders (half finished!)
I have these and retroitted them- easy job and they work great!
Z4 2.2 sterling grey,Msport seats,retrofit cupholders,cruise,footwell lights,sound gen and mfsw,18"ellipsoids,xenons+light washers,ZHPknob,folding mirrors,3"stubby,update wheel caps,gateway300 ipod, wind deflector to keep the wife happy!
- powerontap
- Senior Member
- Posts: 1948
- Joined: Sat Apr 19, 2008 8:42 pm
- Location: Montreal
Re: Retrofit Cupholders (half finished!)
Being next to the vent, the drink is often affected by running the AC or the heater. Not always a good idea. Some containers also rattle like they want to get out!
Go Topless
- Wondermike
- Moderator
- Posts: 10497
- Joined: Fri Jun 15, 2007 10:16 pm
Re: Retrofit Cupholders (half finished!)
£25 each from the dealer that was 3 years ago though, so maybe they're more expensive now.outrun wrote:Mike, where did you get the cupholders? I didn't spec them and on my recent trip to Monaco my friend did nothing but moan about the lack of cupholders. CSL wheels, CDV, Eibach springs, remap, pogo alert, fancy ipod connector, Iphone cradle, and NO CUPHOLDERS!
Cheers
No I always found them to be good, they are a little bit annoying if you leave it open and try and get out the car, but for the size of drinks we have in the UK they are OK. The biggest problem for the guys in the US is their cups are much bigger and I can see why they wouldn't be much use over there.X-S-Z wrote:Is it a worthwhile mod? I've had similar complaints from passengers akin to outrun, but have noticed a lot of forum members complaining about them as being useless? I am not keen on the appearance of the ultimate cup holder, I like the OEM idea that its hidden when not in use.
For the cash you can't go wrong
-
- Member
- Posts: 418
- Joined: Tue Apr 15, 2008 2:31 pm
Re: Retrofit Cupholders (half finished!)
Best to close the vent behind the drink whilst the cup holder is in usepowerontap wrote:Being next to the vent, the drink is often affected by running the AC or the heater. Not always a good idea. Some containers also rattle like they want to get out!
2004, 53 plate, 3.0 Roadster, Sterling Grey
- outrun
- Member
- Posts: 694
- Joined: Tue Sep 18, 2007 10:44 am
Re: Retrofit Cupholders (half finished!)
Right, ordered cupholders from BMW main stealer for £48 inc vat. Will fit them next week, wish me luck!
2007 z4mc carbon black - gone but not forgotten. The guy I sold to still has it, maybe one day I will buy it back.
Now - Maserati Gransport with many mods. Sounds incredible.
Now - Maserati Gransport with many mods. Sounds incredible.
- Adam D
- Senior Member
- Posts: 1858
- Joined: Mon Oct 15, 2007 2:06 pm
- Location: Langdon Hills, Essex
Re: Retrofit Cupholders (half finished!)
Enjoy your new rattle... I mean cupholdersoutrun wrote:Right, ordered cupholders from BMW main stealer for £48 inc vat. Will fit them next week, wish me luck!
Bit flimsy they are.
Silver Grey 2007 Z4MR which needs to be driven more
- 561design
- Member
- Posts: 401
- Joined: Thu Jun 28, 2007 1:59 pm
- Location: Woodstock,Ga
- Contact:
Re: Retrofit Cupholders (half finished!)
What kind of rocks do you guys drink? I love my cup holders and put al sorta stuff in them. The only time I get concerned is when the cup is tall. The cup then becomes top heavy because the holder itself is shallow.
Charles
flickr
flickr
- outrun
- Member
- Posts: 694
- Joined: Tue Sep 18, 2007 10:44 am
Re: Retrofit Cupholders (half finished!)
Done in 15 minutes. Easily the easiest add on i've ever done.
I also de-badged the car (M badges and Nurburgring sticker are gone, even though I actually got the Ring sticker at the circuit). I'm liking the less busy look. Also I've fitted the carbon rear spoiler which makes the end much more aggresive. Another thing that should have been standard. I'll post pics when I have daylight to take some photos.
Next job is to get a shorter number plate (which is very hard to do these days). My number is only 5 characters and i think it will look cleaner without the inches of pointless yellow and white.
Spolier is a pain to fit, if you're going to buy one (£275! for 2inch wide bit of carbon), then i'd get BMW to do it. It took ages to remove the extra bonding agent that inevitably gets everywhere.
I also de-badged the car (M badges and Nurburgring sticker are gone, even though I actually got the Ring sticker at the circuit). I'm liking the less busy look. Also I've fitted the carbon rear spoiler which makes the end much more aggresive. Another thing that should have been standard. I'll post pics when I have daylight to take some photos.
Next job is to get a shorter number plate (which is very hard to do these days). My number is only 5 characters and i think it will look cleaner without the inches of pointless yellow and white.
Spolier is a pain to fit, if you're going to buy one (£275! for 2inch wide bit of carbon), then i'd get BMW to do it. It took ages to remove the extra bonding agent that inevitably gets everywhere.
2007 z4mc carbon black - gone but not forgotten. The guy I sold to still has it, maybe one day I will buy it back.
Now - Maserati Gransport with many mods. Sounds incredible.
Now - Maserati Gransport with many mods. Sounds incredible.
-
- Newbie
- Posts: 34
- Joined: Sun Jul 29, 2007 12:25 am
- Location: Toronto, ON
Re: Retrofit Cupholders (half finished!)
"and they work great!"
I think you're the first person I've ever heard describe the cup holders as good. Unless I'm drinking a Redbull any other container just dumps whatever all over the inside of the car. The dealer gave me a BMW Travel Cup when I bought my car, put it in the cup holder, watched it fall over, and commented that the Z4 cup holders weren't very good.
I think you're the first person I've ever heard describe the cup holders as good. Unless I'm drinking a Redbull any other container just dumps whatever all over the inside of the car. The dealer gave me a BMW Travel Cup when I bought my car, put it in the cup holder, watched it fall over, and commented that the Z4 cup holders weren't very good.
2005 Z4 3.0 Supercharged
1988 325iX
2003 R1150R Rockster
1988 325iX
2003 R1150R Rockster
- Wondermike
- Moderator
- Posts: 10497
- Joined: Fri Jun 15, 2007 10:16 pm
Re: Retrofit Cupholders (half finished!)
daveysew, I love(d) them too!
When people say stuff rattles around it always makes me wonder if they are closing the holder around the cup/bottle/etc or just leaving it on the biggest size?
When people say stuff rattles around it always makes me wonder if they are closing the holder around the cup/bottle/etc or just leaving it on the biggest size?
- paddy wright
- Lifer
- Posts: 7704
- Joined: Sun Jan 06, 2008 1:00 pm
- Location: south yorkshire
Re: Retrofit Cupholders (half finished!)
out run- pics?
Z4 2.2 sterling grey,Msport seats,retrofit cupholders,cruise,footwell lights,sound gen and mfsw,18"ellipsoids,xenons+light washers,ZHPknob,folding mirrors,3"stubby,update wheel caps,gateway300 ipod, wind deflector to keep the wife happy!
- BMW_Z4_Norway
- Member
- Posts: 137
- Joined: Fri Jun 27, 2008 11:16 pm
- Location: Oslo
Re: Retrofit Cupholders (half finished!)
Where can I buy some and are they hard to fit by yourself?