*SOLD* FS: Sound generator and rubber boot

Buying and selling Z4 related goods (private sales only, no traders)
Online
greg81
Member
Member
Posts: 352
Joined: Thu Mar 02, 2017 6:33 pm

*SOLD* FS: Sound generator and rubber boot

Post by greg81 » Tue May 16, 2017 10:13 pm

Hi all,

I have for sale a complete sound generator and the rubber boot required to fit it to your car. I bought this a few months back from classiccarspares on ebay, but no longer require it as I've had my exhaust modded instead.

Retrofitting this to your car also requires the rubber boot replacement which includes the hole in the side for the sound gen to fit in.

Happy to sell for what I paid for it. Sound gen was £35, and the rubber boot was £26 including my BMW privilege club discount, so £60 + delivery which should be about £4
soundgen.jpg
soundgen.jpg (87.63 KiB) Viewed 566 times
Last edited by greg81 on Mon Jun 26, 2017 7:07 pm, edited 1 time in total.

User avatar
paddy wright
Lifer
Lifer
Posts: 5768
Joined: Sun Jan 06, 2008 1:00 pm
Location: south yorkshire

FS: Sound generator and rubber boot

Post by paddy wright » Wed May 17, 2017 6:55 am

A worthwhile mod for 2.2 and 2.5- love it in my 2.2 and easy to do.
Z4 2.2 sterling grey,Msport seats,retrofit cupholders,cruise,footwell lights,sound gen and mfsw,18"ellipsoids,xenons+light washers,ZHPknob,folding mirrors,3"stubby,update wheel caps,gateway300 ipod, wind deflector to keep the wife happy!

Online
greg81
Member
Member
Posts: 352
Joined: Thu Mar 02, 2017 6:33 pm

FS: Sound generator and rubber boot

Post by greg81 » Wed May 17, 2017 9:56 pm

Cheers Paddy, it really is. Sounds absolutely brutal with all the foam out. Had I not had the exhaust done it'd still be in situ :)

synthedup
Member
Member
Posts: 969
Joined: Tue Aug 13, 2013 7:11 pm
Location: Rotherham

FS: Sound generator and rubber boot

Post by synthedup » Fri May 19, 2017 10:53 am

paddy wright wrote:
Wed May 17, 2017 6:55 am
A worthwhile mod for 2.2 and 2.5- love it in my 2.2 and easy to do.
Can this be put on the facelift 2.0i do we know? :)

kjb1
Newbie
Newbie
Posts: 44
Joined: Sun May 07, 2017 10:07 pm

FS: Sound generator and rubber boot

Post by kjb1 » Fri May 19, 2017 5:17 pm

I WILL TAKE THIS

kjb1
Newbie
Newbie
Posts: 44
Joined: Sun May 07, 2017 10:07 pm

FS: Sound generator and rubber boot

Post by kjb1 » Fri May 19, 2017 5:18 pm

Please pm me, out this evening but will sort cash tomorrow.

Online
MACK
Senior Member
Senior Member
Posts: 2032
Joined: Mon Jun 15, 2015 11:38 am
Location: Manchester

FS: Sound generator and rubber boot

Post by MACK » Fri May 19, 2017 7:05 pm

paddy wright wrote:
Wed May 17, 2017 6:55 am
A worthwhile mod for 2.2 and 2.5- love it in my 2.2 and easy to do.
Was the 3.0 rubber elbow a straight fit. The reason I ask is I'm thinking of trying my 3.0 without it on at all and just going down the exhaust route. So I'm interested to know if the 2.2/2.5 version would fit a 3.0.
05 3.0i SE in Titanium.
Mods inc - Facelift Xenons, M Sport Wheel & Leather Elec/Heated Seats, 15 & 20mm Spacers & M Tyre Sizes. 3M Carbon Fibre Trim, 4 Spot Clear Rear Lights, Gaptech+, Cruise, MM Tips, ZHP, Stubby.

Online
greg81
Member
Member
Posts: 352
Joined: Thu Mar 02, 2017 6:33 pm

FS: Sound generator and rubber boot

Post by greg81 » Fri May 19, 2017 7:41 pm

MACK wrote:
Fri May 19, 2017 7:05 pm
paddy wright wrote:
Wed May 17, 2017 6:55 am
A worthwhile mod for 2.2 and 2.5- love it in my 2.2 and easy to do.
Was the 3.0 rubber elbow a straight fit. The reason I ask is I'm thinking of trying my 3.0 without it on at all and just going down the exhaust route. So I'm interested to know if the 2.2/2.5 version would fit a 3.0.
You'll need to buy a rubber boot without the hole in side side. An easy replacement and £30 from BMW. Part No. 7514880

Online
MACK
Senior Member
Senior Member
Posts: 2032
Joined: Mon Jun 15, 2015 11:38 am
Location: Manchester

FS: Sound generator and rubber boot

Post by MACK » Fri May 19, 2017 7:53 pm

greg81 wrote:
Fri May 19, 2017 7:41 pm
MACK wrote:
Fri May 19, 2017 7:05 pm
paddy wright wrote:
Wed May 17, 2017 6:55 am
A worthwhile mod for 2.2 and 2.5- love it in my 2.2 and easy to do.
Was the 3.0 rubber elbow a straight fit. The reason I ask is I'm thinking of trying my 3.0 without it on at all and just going down the exhaust route. So I'm interested to know if the 2.2/2.5 version would fit a 3.0.
You'll need to buy a rubber boot without the hole in side side. An easy replacement and £30 from BMW. Part No. 7514880
Thanks
I just wanted to check the aperture of the boot is the same on the 3.0 as the 2.5 before buying anything
05 3.0i SE in Titanium.
Mods inc - Facelift Xenons, M Sport Wheel & Leather Elec/Heated Seats, 15 & 20mm Spacers & M Tyre Sizes. 3M Carbon Fibre Trim, 4 Spot Clear Rear Lights, Gaptech+, Cruise, MM Tips, ZHP, Stubby.

Online
greg81
Member
Member
Posts: 352
Joined: Thu Mar 02, 2017 6:33 pm

FS: Sound generator and rubber boot

Post by greg81 » Fri May 19, 2017 8:01 pm

MACK wrote:
Fri May 19, 2017 7:53 pm
greg81 wrote:
Fri May 19, 2017 7:41 pm
MACK wrote:
Fri May 19, 2017 7:05 pm


Was the 3.0 rubber elbow a straight fit. The reason I ask is I'm thinking of trying my 3.0 without it on at all and just going down the exhaust route. So I'm interested to know if the 2.2/2.5 version would fit a 3.0.
You'll need to buy a rubber boot without the hole in side side. An easy replacement and £30 from BMW. Part No. 7514880
Thanks
I just wanted to check the aperture of the boot is the same on the 3.0 as the 2.5 before buying anything
Can't say 100% for the 2.5, but my 2.2 to the 3.0 was a direct replacement. I don't imagine it'd be different for the 2.5 though!

Online
MACK
Senior Member
Senior Member
Posts: 2032
Joined: Mon Jun 15, 2015 11:38 am
Location: Manchester

FS: Sound generator and rubber boot

Post by MACK » Fri May 19, 2017 8:30 pm

greg81 wrote:
Fri May 19, 2017 8:01 pm
MACK wrote:
Fri May 19, 2017 7:53 pm
greg81 wrote:
Fri May 19, 2017 7:41 pm


You'll need to buy a rubber boot without the hole in side side. An easy replacement and £30 from BMW. Part No. 7514880
Thanks
I just wanted to check the aperture of the boot is the same on the 3.0 as the 2.5 before buying anything
Can't say 100% for the 2.5, but my 2.2 to the 3.0 was a direct replacement. I don't imagine it'd be different for the 2.5 though!
thanks
that's exactly what i needed to know. i know the 2.2 and 2.5 share the same part i just wasnt sure if it fitted the 3.0 throttle boby and air flow meter pipework
05 3.0i SE in Titanium.
Mods inc - Facelift Xenons, M Sport Wheel & Leather Elec/Heated Seats, 15 & 20mm Spacers & M Tyre Sizes. 3M Carbon Fibre Trim, 4 Spot Clear Rear Lights, Gaptech+, Cruise, MM Tips, ZHP, Stubby.

kjb1
Newbie
Newbie
Posts: 44
Joined: Sun May 07, 2017 10:07 pm

FS: Sound generator and rubber boot

Post by kjb1 » Fri May 19, 2017 11:25 pm

Did you read my messages?

User avatar
paddy wright
Lifer
Lifer
Posts: 5768
Joined: Sun Jan 06, 2008 1:00 pm
Location: south yorkshire

FS: Sound generator and rubber boot

Post by paddy wright » Sat May 20, 2017 9:59 am

MACK wrote:
Fri May 19, 2017 8:30 pm
greg81 wrote:
Fri May 19, 2017 8:01 pm
MACK wrote:
Fri May 19, 2017 7:53 pm

Thanks
I just wanted to check the aperture of the boot is the same on the 3.0 as the 2.5 before buying anything
Can't say 100% for the 2.5, but my 2.2 to the 3.0 was a direct replacement. I don't imagine it'd be different for the 2.5 though!
thanks
that's exactly what i needed to know. i know the 2.2 and 2.5 share the same part i just wasnt sure if it fitted the 3.0 throttle boby and air flow meter pipework
The boot is a direct swap but you also need the gasket ring (item 7 in the diagram) to ensure a good fit as it is slightly narrower.
IMG_1289.PNG
IMG_1289.PNG (116.1 KiB) Viewed 365 times
Z4 2.2 sterling grey,Msport seats,retrofit cupholders,cruise,footwell lights,sound gen and mfsw,18"ellipsoids,xenons+light washers,ZHPknob,folding mirrors,3"stubby,update wheel caps,gateway300 ipod, wind deflector to keep the wife happy!

Online
MACK
Senior Member
Senior Member
Posts: 2032
Joined: Mon Jun 15, 2015 11:38 am
Location: Manchester

FS: Sound generator and rubber boot

Post by MACK » Sat May 20, 2017 11:01 am

paddy wright wrote:
Sat May 20, 2017 9:59 am
MACK wrote:
Fri May 19, 2017 8:30 pm
greg81 wrote:
Fri May 19, 2017 8:01 pm


Can't say 100% for the 2.5, but my 2.2 to the 3.0 was a direct replacement. I don't imagine it'd be different for the 2.5 though!
thanks
that's exactly what i needed to know. i know the 2.2 and 2.5 share the same part i just wasnt sure if it fitted the 3.0 throttle boby and air flow meter pipework
The boot is a direct swap but you also need the gasket ring (item 7 in the diagram) to ensure a good fit as it is slightly narrower.
IMG_1289.PNG
cheers Paddy!
05 3.0i SE in Titanium.
Mods inc - Facelift Xenons, M Sport Wheel & Leather Elec/Heated Seats, 15 & 20mm Spacers & M Tyre Sizes. 3M Carbon Fibre Trim, 4 Spot Clear Rear Lights, Gaptech+, Cruise, MM Tips, ZHP, Stubby.

Online
greg81
Member
Member
Posts: 352
Joined: Thu Mar 02, 2017 6:33 pm

FS: Sound generator and rubber boot

Post by greg81 » Mon Jun 19, 2017 5:46 pm

Due to me having to take a couple of unscheduled weeks offline this is still for sale

Post Reply

Who is online

Users browsing this forum: 2dogs, alane29, bz4kev, Dave1971, Majestic-12 [Bot], mpm, Nican48, Rally, scooobydont, statey, Zikim and 26 guests