Page 1 of 5
Show me your aftermarket wheel/lowering setup....
Posted: Thu Jul 20, 2017 6:52 pm
by silverdevill
Hey you lot!, i'm after a bit of wheel inspiration as i start my coilover/lowering spring/wheel, phase of modding the zed (E85 3.0si) and just want to see what others have gone for. So post your wheels/ wheel spec, coilover, spring setup as i'm getting low on ideas (at least original ones, CSL reps has been done to death now!...... not that there's anything wrong with them!).
Cheers guys
Show me your aftermarket wheel/lowering setup....
Posted: Fri Jul 21, 2017 7:00 am
by StigJ
Wheels: Linea Corse LC818 8,5x19" ET34 & 10x19" ET41 with Michelin PSS 225/35-19 front and PS4S 265/35-19 rears.
Suspension: H&R lowering springs (35mm) with OEM M-Tech shocks.
Others: Pulled pins on OEM top shock mounts to get a little more negative camber. H&R lower sway bars front & rear.
When I get the chance to do a little modding again I'm thinking of getting H&R coilovers and some 18" wheels with lip. Preferably AC Schnitzer Type II or III....
Show me your aftermarket wheel/lowering setup....
Posted: Fri Jul 21, 2017 8:30 am
by jamie_z4
E46 Jom coil overs
Style 128 reps 8.5j front et25 10j rear et30
[IMG]
http://i.imgur.com/dgVLe8F.jpg[/IMG]
Show me your aftermarket wheel/lowering setup....
Posted: Fri Jul 21, 2017 10:28 am
by Joycey
Old photo but you get the idea. TSW Bathurst 18"
- IMG_5388.PNG (1.4 MiB) Viewed 4619 times
Show me your aftermarket wheel/lowering setup....
Posted: Fri Jul 21, 2017 11:01 am
by Carmad84
That looks amazing!
Show me your aftermarket wheel/lowering setup....
Posted: Fri Jul 21, 2017 12:27 pm
by bmwaddict
Similar to StigJ, Linea Corse LC818s, 8.5 but ET30, 10x19, 235/35 and 275/30 Bridgestone Potenzas, on H&R 25mm springs and oem shocks (soon to be upgraded to Bilsteins).
- IMAG1101~2.jpg (350.81 KiB) Viewed 4599 times
Show me your aftermarket wheel/lowering setup....
Posted: Fri Jul 21, 2017 12:56 pm
by jamie_z4
Carmad84 wrote: ↑Fri Jul 21, 2017 11:01 am
That looks amazing!
Why thankyou
Show me your aftermarket wheel/lowering setup....
Posted: Fri Jul 21, 2017 3:37 pm
by z4pilot
Style 189's Fronts 8J ET34, Rears 8.5J ET37, running on Eibach springs and OEM dampers
Show me your aftermarket wheel/lowering setup....
Posted: Fri Jul 21, 2017 6:48 pm
by mr wilks
Carmad84 wrote: ↑Fri Jul 21, 2017 11:01 am
That looks undriveable!
Sorted the mis wording for you Carmad
Show me your aftermarket wheel/lowering setup....
Posted: Fri Jul 21, 2017 7:33 pm
by jamie_z4
mr wilks wrote: ↑Fri Jul 21, 2017 6:48 pm
Carmad84 wrote: ↑Fri Jul 21, 2017 11:01 am
That looks undriveable!
Sorted the mis wording for you Carmad
You'll see its perfectly drivable on the run out grandad
Show me your aftermarket wheel/lowering setup....
Posted: Sun Jul 23, 2017 7:27 pm
by Beedub
heres mine... excuse the crappy pic.
Show me your aftermarket wheel/lowering setup....
Posted: Sun Jul 23, 2017 7:30 pm
by Beedub
another view
Show me your aftermarket wheel/lowering setup....
Posted: Sun Jul 23, 2017 7:32 pm
by Beedub
wheels are 260M from the v8 M3 in o.e Ferric grey which looks bronze some light and other a dark silver. Nice and aggressive fitment , Suspension is Kw clubsport 3 Way sitting a nice and conservative 12- 15mm lower than stock z4m suspension as you can see by the nice Gap above the tyre to fender ... ( basically on their highest setting)
Show me your aftermarket wheel/lowering setup....
Posted: Sun Jul 23, 2017 9:20 pm
by bmwaddict
Beedub wrote: ↑Sun Jul 23, 2017 7:30 pmanother view
Looks great! What's the spec on those wheels please mate? 9j front 10j rear? Tyre sizes? I
I ask because I would love some M359s but thought 9j wouldn't fit on the front of a lowered z4 without quite a bit of stretch and I'd like to stay with 235/35 front tyres.
Show me your aftermarket wheel/lowering setup....
Posted: Sun Jul 23, 2017 10:06 pm
by Beedub