Genuine CSL 19's on a 3.0si coupe.

Alloy wheels and tyre discussion
User avatar
mr wilks
Lifer
Lifer
Posts: 16817
Joined: Wed Jul 04, 2012 10:02 pm
Location: Lancs or Normandy , i don't mind which

Genuine CSL 19's on a 3.0si coupe.

Post by mr wilks » Tue Dec 05, 2017 11:06 pm

atticus wrote:
Tue Dec 05, 2017 10:18 pm
fearless wrote:
Mon Nov 27, 2017 12:46 pm
From memory, to make proper CSL rears fit, without it completely destroying the rear wings, is to have the wheels skimmed 3-5mm and run some purposeful camber. I considered it when looking at 19" options.
maybe the answer is here :
I have bought CSL wheels made by BBS for BMW M3...?
Bobo075 have bought CSL wheels made by BMW for BMW 1M...?
It may be the solution since both wheels are like twins but not made by the same factory... :roll:

Does anybody know the ET for these wheels ? :!: :headbang:
Think you are getting your wheels confused here / CSL wheels were made for the E46 M3 & E46 M3 CSL / both sets had same rears but the M3 had 8j front as opposed to 8.5j front of the M3 CSL model .
The 1M runs a totally different wheel style 359Comp with 9j fronts & 10j rears as standard
My 10 x Z4s

E86
E85
Grey///MR
3.0Si E85
E89 23i
3.0Si E85
E86
3.0Si E85
Imola///MR
current 35i Msport 6spd :driving:


Image
https://www.instagram.com/andybmwheels/

User avatar
Beedub
Lifer
Lifer
Posts: 8650
Joined: Wed Sep 10, 2008 2:25 pm
X-Box live gamer tag: be03dub
Location: Sutton Coldfield

Genuine CSL 19's on a 3.0si coupe.

Post by Beedub » Wed Dec 06, 2017 8:06 am

i sold my genuine CSL to a chap with a 3.0 after the original buyer pulled put, i helped him fit them to the car too, and to my amazement they did physically fit on the car!! but it looked like a muscle car as the tyres and wheels sat slightly proud at the rear , i looked to me like on full compression you'd get quite abit of rub , but only minor changes needed from what i saw to get them to work. The stock rear fenders aren't rolled so with this done i cant see their being an issue, and it did look awesomely squat! regular driving im not even sure if mods would be needed if caution was used.

Me personally id never modify my car to fit wheels however.
Ti silver Z4m Roadster... Homing in on a decade of ownership.... my absolute pride and joy.

User avatar
MrPT
Senior Member
Senior Member
Posts: 2798
Joined: Sun Oct 21, 2012 7:44 pm
Location: London, innit

Genuine CSL 19's on a 3.0si coupe.

Post by MrPT » Wed Dec 06, 2017 1:20 pm

bobo075 wrote:
Mon Nov 27, 2017 12:44 pm
it depends of the view....

Image

Image
Yes. In pictures where you can't see the wheel rim or the arch, they look good.
Image
Z4MC: SG/Imola|CSLs|KWv3|Eventuri|OEM strut brace|Vagbremtechnic front BBK
Z4 2.5si: gone

bobo075
Member
Member
Posts: 96
Joined: Thu Jan 19, 2017 4:18 pm

Genuine CSL 19's on a 3.0si coupe.

Post by bobo075 » Wed Dec 06, 2017 3:34 pm

atticus wrote:
Tue Dec 05, 2017 10:18 pm
fearless wrote:
Mon Nov 27, 2017 12:46 pm
From memory, to make proper CSL rears fit, without it completely destroying the rear wings, is to have the wheels skimmed 3-5mm and run some purposeful camber. I considered it when looking at 19" options.
maybe the answer is here :
I have bought CSL wheels made by BBS for BMW M3...?
Bobo075 have bought CSL wheels made by BMW for BMW 1M...?
It may be the solution since both wheels are like twins but not made by the same factory... :roll:

Does anybody know the ET for these wheels ? :!: :headbang:
I have M3 CSL rear wheels :wink: 9,5x19 ET27mm ref 36 11 2 282 999

atticus
Newbie
Newbie
Posts: 42
Joined: Fri Oct 27, 2017 6:53 pm

Genuine CSL 19's on a 3.0si coupe.

Post by atticus » Wed Dec 06, 2017 6:07 pm

Same here = M3 CSL but Michelin tyres...

atticus
Newbie
Newbie
Posts: 42
Joined: Fri Oct 27, 2017 6:53 pm

Genuine CSL 19's on a 3.0si coupe.

Post by atticus » Wed Dec 06, 2017 7:02 pm

MrPT wrote:
Wed Dec 06, 2017 1:20 pm


Yes. In pictures where you can't see the wheel rim or the arch, they look good.
Unfortunately, it rubs... And it's oem CSL made by BBS.
thanks for feedback anyway...
Attachments
IMG_20171205_130950.jpg
IMG_20171205_130950.jpg (300.11 KiB) Viewed 69 times

atticus
Newbie
Newbie
Posts: 42
Joined: Fri Oct 27, 2017 6:53 pm

Genuine CSL 19's on a 3.0si coupe.

Post by atticus » Wed Dec 06, 2017 7:09 pm

mr wilks wrote:
Tue Dec 05, 2017 11:06 pm
Think you are getting your wheels confused here / CSL wheels were made for the E46 M3 & E46 M3 CSL / both sets had same rears but the M3 had 8j front as opposed to 8.5j front of the M3 CSL model .
The 1M runs a totally different wheel style 359Comp with 9j fronts & 10j rears as standard
Uuuuuh??? Totally different wheel style...? 359???

https://encrypted-tbn0.gstatic.com/imag ... 1iAT_1e0ug

:?

User avatar
Beedub
Lifer
Lifer
Posts: 8650
Joined: Wed Sep 10, 2008 2:25 pm
X-Box live gamer tag: be03dub
Location: Sutton Coldfield

Genuine CSL 19's on a 3.0si coupe.

Post by Beedub » Thu Dec 07, 2017 8:28 am

atticus wrote:
Wed Dec 06, 2017 7:09 pm
mr wilks wrote:
Tue Dec 05, 2017 11:06 pm
Think you are getting your wheels confused here / CSL wheels were made for the E46 M3 & E46 M3 CSL / both sets had same rears but the M3 had 8j front as opposed to 8.5j front of the M3 CSL model .
The 1M runs a totally different wheel style 359Comp with 9j fronts & 10j rears as standard
Uuuuuh??? Totally different wheel style...? 359???

https://encrypted-tbn0.gstatic.com/imag ... 1iAT_1e0ug

:?
Both Mesh style , different widths and very different ETs
Ti silver Z4m Roadster... Homing in on a decade of ownership.... my absolute pride and joy.

Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests