Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

OEM LED number plate lights

Post Reply
JAD

OEM LED number plate lights

Post by JAD » Tue Mar 03, 2015 4:13 pm

Not sure if this has already been done - couldn't find a decent guide, so hope the following helps;

Part numbers for OEM LED rear number plate lights and connectors;

Connectors; 61138365340 x2
Lights; 63267193294 x2

First of all, take the old units out - they pivot from the left, so take your flat head screw driver (protected with a cloth) to the right side and remove.

Image

Image

Image

Once hanging down by the wire, disconnect the connectors and you'll see how they are different;

Image

You need to look at the back of the original connector for a tab. Lift this up with a small screw driver and pull the sleeve of the connector back up the wire like so;

Image

Image

Next remove the white locking collar which just unclips using your nails;

Image

Image

Then, from the above photo, you can see that the pins at the end of the wires have a slightly raised barb. Push this gently and pull back the wires together (again, gently) and the pins will release from the plastic connector;

Image

Reverse the process with the new connectors and should end up with;

Image

Image

Image

Image

And lights on;

Image

(iPhone makes it look yellow, also thanks to the crap Photobucket quality).

The Saint
Member
Member
Posts: 76
Joined: Sun Jun 14, 2015 12:54 pm
Location: Worcestershire

OEM LED number plate lights

Post by The Saint » Sun May 12, 2019 5:12 pm

Great guide, Thank you :thumbsup:
Saved a lot of trial and error, I owe you a drink :cheers: :cheers: :cheers: :cheers:

User avatar
dj_jormi
Newbie
Newbie
Posts: 43
Joined: Sat Apr 06, 2019 8:59 am
Location: Spain

OEM LED number plate lights

Post by dj_jormi » Tue Feb 02, 2021 10:31 am

It is not necessary to buy the connectors, just breaking the tab of the old connector is enough.

Image

great brico anyway!

Post Reply