Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Post 04 cruise control retrofit N52

Post Reply
Z43.0Si
Member
Member
Posts: 381
Joined: Thu Nov 26, 2015 11:07 pm
Location: Surrey/Hampshire

Post 04 cruise control retrofit N52

Post by Z43.0Si » Tue Jun 13, 2017 8:15 pm

Thank you Sir :thumbsup:

Tullock
Newbie
Newbie
Posts: 5
Joined: Tue Apr 17, 2018 12:30 pm

Post 04 cruise control retrofit N52

Post by Tullock » Tue Apr 17, 2018 1:07 pm

Hi guys !
In need of a bit of help, I convinced the Parts guy down and BMW to print me off the retrofit instructions for the cruise control. I followed the instructions to the best of my ability and I have triple checked wires that i have spliced into ( using the pin numbers ) but i have ran into two or more issues.
Firstly my DME is completely different to the one in the instructions, its a bosh one that has the lateral locking plugs rather than the hinged locking plugs in the images. i have spliced into one of the "pin 4"s of the "x60002" plug ( there are two and i chose the one in light grey plastic instead of the black plastic casing) however i have no idea if that is the correct "pin 4"....
Both "Pin 4"s already have wires in however i have read of owners splicing into this wire and not having any issues.

my second issue is that once i had everything connected as per my understanding of the instructions and took the car for a test drive i found that not only did the cruise control not work but i had also lost the use of my indicators ( my hazards were flashing constantly but no lights on the dash or ticking noise to let me know) , my hood and my windows had both given up and the dash light for the high beams didnt illuminate.
the pins on the light module are all individually numbered so i'm sure that even tho non of the wires are the right color i have the right wires on that end.

shes a 58 plate 2L with the N46 engine

if anyone has any idea where iv gone wrong please let me know

thanks

HyperGrade
Member
Member
Posts: 131
Joined: Fri Jul 14, 2017 9:51 pm
Location: Peterborough

Post 04 cruise control retrofit N52

Post by HyperGrade » Thu Apr 19, 2018 2:54 pm

Tullock wrote: Tue Apr 17, 2018 1:07 pm shes a 58 plate 2L with the N46 engine

if anyone has any idea where iv gone wrong please let me know
Where did you get the cable from? This is what I dreaded when doing mine with a forum supplied cable, but thankfully it went better than your experience.
2nd Z4, Auction find, 2007 3.0si Sport, 45k, Silver Grey, 224 Alloys. Retro Cruise :thumbsup:
Previous: 2003, 2.5i Sport, Sterling Grey (2006-2010)

Tullock
Newbie
Newbie
Posts: 5
Joined: Tue Apr 17, 2018 12:30 pm

Post 04 cruise control retrofit N52

Post by Tullock » Thu Apr 19, 2018 5:22 pm

HyperGrade wrote: Thu Apr 19, 2018 2:54 pm Where did you get the cable from? This is what I dreaded when doing mine with a forum supplied cable, but thankfully it went better than your experience.
My dad is an electrician and made the wiring for me. Its only 3 cables .... i never expected it to cause any issues. Do you have any suggestions for the N46 Engine ?
Thanks

"HyperGrade" can you pm me your email i don't yet have messaging privileges on this forum.
Thanks

User avatar
Rucky
Member
Member
Posts: 390
Joined: Wed Jan 23, 2019 3:07 pm
Location: Glos, England

Post 04 cruise control retrofit N52

Post by Rucky » Sat Apr 13, 2019 6:21 pm

Thank you, Found this post very useful.
Just retrofitted an OEM Cruise Control kit to the Wife's Z4 E85 3.0si 2007.

Kit from Lithuania for £175 via your favourite auction site.
Instructions from :
http://bimmertune.com/index.php?route=b ... ticle_id=5

Plug and play - wire colours matched the car - 3 hours including feeding the blue black wire through the bulkhead and loom grommets

Works at 30mph too so does what it is supposed to.

No problem identifying any of the pins or locations - IF you bother to split the plugs put your glasses onand look at the Pin numbers.

Might attach a few more photos in a separate post if anyone is interested
04 2.5i Titan silver - 1st Z4 now sold on
07 3.0si Silver Grey M Sport pak.
X5 and assorted motorbikes

User avatar
Warming
Member
Member
Posts: 92
Joined: Sat Jul 28, 2018 9:47 am

Post 04 cruise control retrofit N52

Post by Warming » Tue May 14, 2019 6:54 pm

Hi guys am working thru the retrofit have got to the feeding blue wire into the engine bay

Photo on page one of this guide looks different from my perspective see photo is there another cover behind the glovebox that I need to remove?
Attachments
20190514_183803.jpg
20190514_183803.jpg (290.45 KiB) Viewed 5501 times

User avatar
srhutch
Moderator
Moderator
Posts: 26959
Joined: Tue Jun 19, 2007 1:22 pm
Location: East Sussex, UK
Contact:

Post 04 cruise control retrofit N52

Post by srhutch » Tue May 14, 2019 7:31 pm

Rucky wrote: Sat Apr 13, 2019 6:21 pm Thank you, Found this post very useful.
Just retrofitted an OEM Cruise Control kit to the Wife's Z4 E85 3.0si 2007.

Kit from Lithuania for £175 via your favourite auction site.
Instructions from :
http://bimmertune.com/index.php?route=b ... ticle_id=5

Plug and play - wire colours matched the car - 3 hours including feeding the blue black wire through the bulkhead and loom grommets

Works at 30mph too so does what it is supposed to.

No problem identifying any of the pins or locations - IF you bother to split the plugs put your glasses onand look at the Pin numbers.

Might attach a few more photos in a separate post if anyone is interested
For future reference to others Cheaper to by the stalk from main dealer for £105 and a loom for £20
Image

User avatar
srhutch
Moderator
Moderator
Posts: 26959
Joined: Tue Jun 19, 2007 1:22 pm
Location: East Sussex, UK
Contact:

Post 04 cruise control retrofit N52

Post by srhutch » Tue May 14, 2019 7:33 pm

Warming wrote: Tue May 14, 2019 6:54 pm Hi guys am working thru the retrofit have got to the feeding blue wire into the engine bay

Photo on page one of this guide looks different from my perspective see photo is there another cover behind the glovebox that I need to remove?
Your too high, yo need to go underneath all that then you’ll see the hole on the firewall (with bonnet up)
Image

User avatar
Warming
Member
Member
Posts: 92
Joined: Sat Jul 28, 2018 9:47 am

Post 04 cruise control retrofit N52

Post by Warming » Tue May 14, 2019 7:46 pm

Thanks was being a dummy my mistake.

Blue cable was easier than expected to push up into engine bay.

Now which connector is it this one and is it pin 39?
Attachments
20190514_194424.jpg
20190514_194424.jpg (292.35 KiB) Viewed 5496 times

User avatar
Warming
Member
Member
Posts: 92
Joined: Sat Jul 28, 2018 9:47 am

Post 04 cruise control retrofit N52

Post by Warming » Tue May 14, 2019 10:11 pm

For reference to anyone carrying out the retrofit on a pre-2006 M54, I've taken a screenshot of the BMW guide - blue cable goes into PIN 27 of one of the 40 way connectors, looks like the 40 way closest to front of car.
Attachments
blue wire.PNG
blue wire.PNG (356.6 KiB) Viewed 5491 times

Maddo6659
Newbie
Newbie
Posts: 25
Joined: Tue Apr 25, 2017 2:35 pm

Post 04 cruise control retrofit N52

Post by Maddo6659 » Fri Jan 24, 2020 5:09 pm

Followed the excellent guide here. However, it isn't working and my brake lights are constantly on. 😏 any gurus have any ideas?
'56 Coupe in montego blue. Or 'Herr Zippy Von Blaupunkt' as I prefer. :thumbsup:

Post Reply