Dreaded ABS pump/ module issues

Discuss problems you have had or are having with your Z4
E86montego
Member
Member
Posts: 139
Joined: Wed Jun 17, 2015 8:55 am

Dreaded ABS pump/ module issues

Post by E86montego » Wed Oct 18, 2017 8:34 pm

D4dawg wrote:
Wed Oct 18, 2017 8:31 pm
Module buddy
How do you mean?

User avatar
D4dawg
Senior Member
Senior Member
Posts: 2731
Joined: Fri Sep 04, 2015 7:22 pm
Location: Nr oxford

Dreaded ABS pump/ module issues

Post by D4dawg » Wed Oct 18, 2017 9:02 pm

You asked if price was for pump or module
It was module the piece with ate stamp
Inter Z4MR-OE CSLs,carbon diffuser/splitters/h-brake,H&R ARB/springs,Ssprint decat,Oewing,DS2500,Strut brace,Pro nav,Pro sound,Carbon pack,Gap tech+,Remap,M bridge,Blue eventuri,Eisenmann race,M5 gearknob,6/4pot custom Brembo/hel lines,Insta-d4dawg

User avatar
liamconnolly
Newbie
Newbie
Posts: 22
Joined: Mon Oct 25, 2010 6:24 pm

Dreaded ABS pump/ module issues

Post by liamconnolly » Mon Oct 23, 2017 9:00 am

Like the OP i have the 3452 6769164 Ate unit and it failed a few years ago.

It was sent to ECU testing in Derby who fixed it (bushes on pump side), and it worked great until recently when it failed once more. ECU testing were great in warranting their work, however advised on this occasion the fault was processor related, so essentially the module part had now failed, and not the pump they had worked on.

I'm now in 2 minds, as to whether to risk getting 34526778492 - the repair kit module (ECU testing didn't seem so convinced), or spending a little bit more and getting a whole new unit.

Again, like the OP says it looks like the whole DSC hydro unit has a new part code (34516778490) - can anyone confirm this?

Thanks

Liam

E86montego
Member
Member
Posts: 139
Joined: Wed Jun 17, 2015 8:55 am

Dreaded ABS pump/ module issues

Post by E86montego » Mon Nov 13, 2017 9:15 pm

greg1953 wrote:
Tue Oct 10, 2017 7:26 am
E86montego wrote:
Fri Oct 06, 2017 7:48 pm
Hi all,

In a real nasty situation with the ABS pump/ module. Mine has died and seems it cannot be repaired. I'm in dire need of a replacement part since BMW want a lofty £2500.

Would anybody know if I have to use the same numbers or could I get a different part number and get its software refreshed? Also, does anybody know where I could get one from? The confusing part of this matter is down to the part numbers... I believe the 'overall' part number for both the pump and module combined is: 34516778490. However as you can see on the pictures it has other part numbers on the module (10.0961-0829.3/ 10.0614-3758.3) and the pump (3451-6778238-01). Thus funding a right one seems near impossible.

Huge thanks in advance for any help that can be given.

I'm sure this thread will become useful as it seems finding an ABS pump/ module for 2006-2009 cars is pretty much impossible. All our cars are getting to the age where they will need replacing soon, so any help will hopefully benefit everybody.
I had to buy a new unit, £2090 from main dealer for my '07 2.0 but you are welcome to my old broken one if any of the parts are of use to you, as someone mentioned, use the firm in Derby, I had a bad experience with BBA

Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests