Do the seatbelt supports work?
I kind of want to push the belt away from my neck. I looked at these and dismissed them because the belt would still chafe on the neck.
Do the seatbelt supports work?
to a degree helps keep belt from falling behind the seat but the belt can slip out a bit to easy when putting belt on only just fitted them so will let you know with regards to chaffing
That's fine especially measured that close to the edge.Ducklakeview wrote: ↑Mon Nov 06, 2017 6:03 pm Checked the rear discs for run out as could feel a little vibration on braking, they run out by 0.05mm or about. 002" which I presume is acceptable?
20171106_170058.jpg
Mike
Fronts were even less, 0.02mm so the vibration is coming from elsewhere...G600 wrote: ↑Mon Nov 06, 2017 7:07 pmThat's fine especially measured that close to the edge.Ducklakeview wrote: ↑Mon Nov 06, 2017 6:03 pm Checked the rear discs for run out as could feel a little vibration on braking, they run out by 0.05mm or about. 002" which I presume is acceptable?
20171106_170058.jpg
Mike
Have you checked for variation in the disc thickness? The limit for that is only .01mm (E30 but I can't see it being different on an E85)Ducklakeview wrote: ↑Mon Nov 06, 2017 7:12 pm
Fronts were even less, 0.02mm so the vibration is coming from elsewhere...
Mike
Have you checked your front rtab's?Ducklakeview wrote: ↑Mon Nov 06, 2017 7:12 pmFronts were even less, 0.02mm so the vibration is coming from elsewhere...G600 wrote: ↑Mon Nov 06, 2017 7:07 pmThat's fine especially measured that close to the edge.Ducklakeview wrote: ↑Mon Nov 06, 2017 6:03 pm Checked the rear discs for run out as could feel a little vibration on braking, they run out by 0.05mm or about. 002" which I presume is acceptable?
20171106_170058.jpg
Mike
Mike
Replaced 3 months ago. It's only a very slight vibration, but doing my head in.
hi mate I would say not much different maybe a little more clearance but to be honest I only got them to stop the belt disappearing behind the seat and having to search for it behind me also think I will have to mod it some way to stop the belt slipping out of the clip but certainly better than it was
I guess it's a process of elimination then and checking the usual suspension components/ball joints etc. I'd probably start with the ball joints on the front arms
Is it me, or does that disc look really worn? Should the lip be that deep?MACK wrote: ↑Mon Nov 06, 2017 8:13 pmI guess it's a process of elimination then and checking the usual suspension components/ball joints etc. I'd probably start with the ball joints on the front armsMACK wrote: ↑Mon Nov 06, 2017 7:31 pmHave you checked your front rtab's?Ducklakeview wrote: ↑Mon Nov 06, 2017 7:12 pm
Fronts were even less, 0.02mm so the vibration is coming from elsewhere...
Mike