437M Wheels

VRSteve · Post by **VRSteve** » Mon Dec 18, 2017 5:12 pm

Has anyone tried fitting these??

I think they are from the M4?

I assume they will fit, but I'm sure I'll be corrected shortly!

The front wheels are 19x9J, ET29

The rear wheels are 19,10J, ET40

Any thoughts anyone?

jamie_z4 · Post by **jamie_z4** » Mon Dec 18, 2017 6:03 pm

Not without a lot stretch which I imagine isn't your thing...

Ive got 11j rears with an et of 35 which protrudes roughly 12 mm more than those rears and I'm on a 245/35 tyre. Make your own mind up if they 'fit' or not.

With an M axle you'll probably get away with a 255 rear which is still quite a stretch tbh.

mr wilks · Post by **mr wilks** » Mon Dec 18, 2017 6:06 pm

VRSteve wrote: ↑Mon Dec 18, 2017 5:12 pm Has anyone tried fitting these??

I think they are from the M4?

I assume they will fit, but I'm sure I'll be corrected shortly!

The front wheels are 19x9J, ET29

The rear wheels are 19,10J, ET40

Any thoughts anyone?

Rears will actually sit as 224s on face but rear hubs will be 22mm towards the strut so to get things right you could add 15mm spacers to rear ( i ran same spacers with 224s on my own ZMR) though at that point you wouldn't really want to go any further for fear of leaving the arch .
Fronts ? imagine your 224s with 25mm spacers & that's where the faces of the 437s will finish

if you can stand that look then yes they will technically fit but can't see the fronts looking too pretty

id say 10mm too much but some may disagree

VRSteve · Post by **VRSteve** » Mon Dec 18, 2017 6:07 pm

OK

I'll pass!

Thank you gents.

R60BBA · Post by **R60BBA** » Mon Feb 26, 2018 11:00 am

VRSteve wrote: ↑Mon Dec 18, 2017 5:12 pmHas anyone tried fitting these??

I think they are from the M4?

I assume they will fit, but I'm sure I'll be corrected shortly!

The front wheels are 19x9J, ET29

The rear wheels are 19,10J, ET40

Any thoughts anyone?

Z4-forum.com

Z4-forum.com

437M Wheels

437M Wheels

437M Wheels

437M Wheels

437M Wheels

437M Wheels