At the top of the slippery slope!

Mr Tidy · Post by **Mr Tidy** » Mon Nov 21, 2016 11:34 pm

For 40 years I always washed cars like my Dad did!

Bucket of soapy water and a sponge, bucket of clean water to rinse then a chamois leather for drying - I can hear the gasps of horror from here!

Anyway when it finally stops raining my Z4 is now due for a treat as I have bought these:-

Smartbear · Post by **Smartbear** » Tue Nov 22, 2016 12:25 am

Good lad, now sign up here http://www.detailingworld.co.uk/
Rob

Mr Tidy · Post by **Mr Tidy** » Tue Nov 22, 2016 1:49 am

Smartbear wrote: Good lad, now sign up here http://www.detailingworld.co.uk/Rob

No, no, no - I'm trying to resist!

Marlon · Post by **Marlon** » Tue Nov 22, 2016 4:14 pm

I have followed a similar path Mr. Tidy

I still have sponges, but they have been demoted to washing the alloys and inner wheel arches. Oh, you need a clay mitt next

Matt64 · Post by **Matt64** » Tue Nov 22, 2016 8:20 pm

Clay mitt... Clay mitt? What kind of new fangled devil spawn is this you speak of?

buzyg · Post by **buzyg** » Tue Nov 22, 2016 8:36 pm

I still have sponges.

Pastry · Post by **Pastry** » Tue Nov 22, 2016 8:41 pm

I'm a little further down the slope! I've now got a clay mit and even thinking of getting a da polisher!!!

somebody rescue me please

Marlon · Post by **Marlon** » Tue Nov 22, 2016 8:43 pm

buzyg wrote:I still have sponges.

A seedy basement somewhere:

"Hi, my name is buzyg and I still use sponges" (round of applause)

buzyg · Post by **buzyg** » Tue Nov 22, 2016 8:52 pm

Marlon wrote:
buzyg wrote:I still have sponges.
A seedy basement somewhere:

"Hi, my name is buzyg and I still use sponges" (round of applause)

And for interiors.. Ladies and gentlemen, may I present to you. The Johnson's baby wipe.

Don't worry they are none Alcoholic.

Nanu · Post by **Nanu** » Tue Nov 22, 2016 8:59 pm

Pastry wrote:I'm a little further down the slope! I've now got a clay mit and even thinking of getting a da polisher!!! somebody rescue me please

Your already beyond rescue, been there, done that and got the clay mitt and finishing waxes.

Smartbear · Post by **Smartbear** » Tue Nov 22, 2016 10:00 pm

Pastry wrote:I'm a little further down the slope! I've now got a clay mit and even thinking of getting a da polisher!!! somebody rescue me please

Here's what you're missing mate

: IMG_1055.JPG (112.01 KiB) Viewed 3463 times

Pastry · Post by **Pastry** » Tue Nov 22, 2016 10:15 pm

Smartbear wrote:
Pastry wrote:I'm a little further down the slope! I've now got a clay mit and even thinking of getting a da polisher!!! somebody rescue me please
Here's what you're missing mate

Cheers rob! Here's what you're missing mate

: P6170075.jpg (63.86 KiB) Viewed 3455 times

Smartbear · Post by **Smartbear** » Tue Nov 22, 2016 10:35 pm

Pastry wrote:
Smartbear wrote:
Pastry wrote:I'm a little further down the slope! I've now got a clay mit and even thinking of getting a da polisher!!! somebody rescue me please
Here's what you're missing mate
Cheers rob! Here's what you're missing mate
P6170075.jpg

We could trade, you code my zed and I polish a wing

Rob

TR4man · Post by **TR4man** » Tue Nov 22, 2016 11:09 pm

buzyg wrote:I still have sponges.

Pah - I still have Romanians

Mr Tidy · Post by **Mr Tidy** » Tue Nov 22, 2016 11:16 pm

Smartbear, I hope you have another bucket!!

Just wondering if I could adapt my angle grinder for polishing.

Z4-forum.com

Z4-forum.com