Gap-Tech roof mod

[Samhoylez4]

Hi folks. I've just joined forum after a years worth of debate as I'm pretty crap at this sort of thing. Navigating being my main problem but hey, let's see if I get my problem solved by any of you lovely people. Here goes.

I've just changed from a 2.0 to 3.0 Si but before I got rid I removed my auto roof module. I did write down which colour wires went to which but as I started to refit I realised that my last connection was the black wire from mod to brown. The only solid brown wire is coming from the small plug where as the rest are on the large plug. I'm guessing it's correct as it's the only solid brown wire but I just can't remember if there was a connection made to the smaller of the two plugs. Can anyone help. Thanks.

[markplant]

IMAG0349.jpg (68.24 KiB) Viewed 633 times

[Samhoylez4]

That's brilliant thanks ever so much. I've still got my wiring diagram somewhere but can't remember where I stored it lol. It was correct after all but worth checking out I guess.

[markplant]

Happy to help

[Samhoylez4]

Had a few connection problems at first so sacked the scotch locks and soldered everything. All works a treat. Thanks again.

[firebobby]

Had a few connection problems at first so sacked the scotch locks and soldered everything. All works a treat. Thanks again.

Oi, where the photos then
You can't just pop in and not post photos, are you joining the forum ??

[Samhoylez4]

Hahaha I don't know how to post photos but would be happy to no problem

[Samhoylez4]

Oh and yes I've have joined.